CAJ | 학술논문

利用2个LED开关组成刨床的光电对刀机构.其中一只LED光电开关直接安装在工作台上;另一只则安装在电机轴上,再经过10：1的减速器连接工作台的驱动丝杠.2只LED输出的脉冲经过逻辑＂与＂运算之后给设备发出停止信号.这样的刨床即可用于罗茨转子的粗加工,也可以用于罗茨转子的精加工.
이용2개LED개관조성포상적광전대도궤구.기중일지LED광전개관직접안장재공작태상;령일지칙안장재전궤축상,재경과10：1적감속기련접공작태적구동사강.2지LED수출적맥충경과라집＂여＂운산지후급설비발출정지신호.저양적포상즉가용우라자전자적조가공,야가이용우라자전자적정가공.
Using two LED switches,an optoelectronic planer tool preset machinery was designed.One of the LED switch was directly located on the operation table,and another one was located on the axis after it times 10 of the main driven screw.These two output pulses together gave a stop signal to the machine after a logical AND operation.The planer could be used for roots type rotor manufacture both in rough process and in fine process.