功能材料
功能材料
공능재료
JOURNAL OF FUNCTIONAL MATERIALS
2007年
11期
1893-1897
,共5页
吴萍%陈蓓%邹兴权%李强%张丹莉%肖潭
吳萍%陳蓓%鄒興權%李彊%張丹莉%肖潭
오평%진배%추흥권%리강%장단리%초담
纳米碳管%纳米线%V-L/S-S模型
納米碳管%納米線%V-L/S-S模型
납미탄관%납미선%V-L/S-S모형
以Ni∶Cr=3∶1的双金属层作为催化剂,用C2H2为碳源气体利用化学气相沉积(CVD)法,在不同的温度下制备纳米碳管.扫描电子显微镜(SEM)和透射电子显微镜(TEM)研究制备产物发现:当制备温度高于900℃时,没有纳米碳管生成,制备温度在700~800℃之间纳米碳管中填充有一些离散分布的金属Ni纳米线,制备温度在650℃有纳米碳管生成,但是纳米碳管中没有发现纳米线的填充.通过高分辨透射电子显微镜(HRTEM)分析发现,纳米线是以液态或是粘滞液态填充进纳米碳管.根据实验结果,提出了一个在本实验条件下纳米线填充进纳米碳管的气-液/固-固V- L/S -S(vapor- liquid/solid-solid)模型,这个模型能解释一些传统的V-L-S(vapor- liquid -solid)模型不能解释的实验现象.
以Ni∶Cr=3∶1的雙金屬層作為催化劑,用C2H2為碳源氣體利用化學氣相沉積(CVD)法,在不同的溫度下製備納米碳管.掃描電子顯微鏡(SEM)和透射電子顯微鏡(TEM)研究製備產物髮現:噹製備溫度高于900℃時,沒有納米碳管生成,製備溫度在700~800℃之間納米碳管中填充有一些離散分佈的金屬Ni納米線,製備溫度在650℃有納米碳管生成,但是納米碳管中沒有髮現納米線的填充.通過高分辨透射電子顯微鏡(HRTEM)分析髮現,納米線是以液態或是粘滯液態填充進納米碳管.根據實驗結果,提齣瞭一箇在本實驗條件下納米線填充進納米碳管的氣-液/固-固V- L/S -S(vapor- liquid/solid-solid)模型,這箇模型能解釋一些傳統的V-L-S(vapor- liquid -solid)模型不能解釋的實驗現象.
이Ni∶Cr=3∶1적쌍금속층작위최화제,용C2H2위탄원기체이용화학기상침적(CVD)법,재불동적온도하제비납미탄관.소묘전자현미경(SEM)화투사전자현미경(TEM)연구제비산물발현:당제비온도고우900℃시,몰유납미탄관생성,제비온도재700~800℃지간납미탄관중전충유일사리산분포적금속Ni납미선,제비온도재650℃유납미탄관생성,단시납미탄관중몰유발현납미선적전충.통과고분변투사전자현미경(HRTEM)분석발현,납미선시이액태혹시점체액태전충진납미탄관.근거실험결과,제출료일개재본실험조건하납미선전충진납미탄관적기-액/고-고V- L/S -S(vapor- liquid/solid-solid)모형,저개모형능해석일사전통적V-L-S(vapor- liquid -solid)모형불능해석적실험현상.