塑性工程学报
塑性工程學報
소성공정학보
JOURNAL OF PLASTICITY ENGINEERING
2011年
1期
114-117
,共4页
蒋爱云%郑民欣%邱慧%刘建秀
蔣愛雲%鄭民訢%邱慧%劉建秀
장애운%정민흔%구혜%류건수
磁流变体%添加剂%黏度
磁流變體%添加劑%黏度
자류변체%첨가제%점도
利用基液置换法,将稳定性较好的磁流变体作为润滑油添加剂,以合理的配比加入到润滑油中,并对合成后的润滑油进行黏度测量及摩擦性能测试.由于稳定的磁流变体具有较宽的使用温度范围,良好的抗沉降团聚稳定性能,以及良好的润滑抗磨损性能,可以作为润滑油的添加剂,以适当提高润滑油黏度,降低磨损.实验及测试结果表明,磁流变体添加剂质量分数在3%~5%之间,最大无卡咬负荷为80kg~100kg,磨斑直径为0.48mm~0.51mm.稳定的磁流变体可以应用于风力发电机传动系统中的润滑,且添加剂质量分数在3%~5%的范围.
利用基液置換法,將穩定性較好的磁流變體作為潤滑油添加劑,以閤理的配比加入到潤滑油中,併對閤成後的潤滑油進行黏度測量及摩抆性能測試.由于穩定的磁流變體具有較寬的使用溫度範圍,良好的抗沉降糰聚穩定性能,以及良好的潤滑抗磨損性能,可以作為潤滑油的添加劑,以適噹提高潤滑油黏度,降低磨損.實驗及測試結果錶明,磁流變體添加劑質量分數在3%~5%之間,最大無卡咬負荷為80kg~100kg,磨斑直徑為0.48mm~0.51mm.穩定的磁流變體可以應用于風力髮電機傳動繫統中的潤滑,且添加劑質量分數在3%~5%的範圍.
이용기액치환법,장은정성교호적자류변체작위윤활유첨가제,이합리적배비가입도윤활유중,병대합성후적윤활유진행점도측량급마찰성능측시.유우은정적자류변체구유교관적사용온도범위,량호적항침강단취은정성능,이급량호적윤활항마손성능,가이작위윤활유적첨가제,이괄당제고윤활유점도,강저마손.실험급측시결과표명,자류변체첨가제질량분수재3%~5%지간,최대무잡교부하위80kg~100kg,마반직경위0.48mm~0.51mm.은정적자류변체가이응용우풍력발전궤전동계통중적윤활,차첨가제질량분수재3%~5%적범위.