现代制造工程
現代製造工程
현대제조공정
MODERN MANUFACTURING ENGINEERING
2009年
12期
75-79
,共5页
侯智斌%庾晓明%邵立康%陈向春
侯智斌%庾曉明%邵立康%陳嚮春
후지빈%유효명%소립강%진향춘
螺栓变温设计%极限载荷%松螺栓%控制紧螺栓
螺栓變溫設計%極限載荷%鬆螺栓%控製緊螺栓
라전변온설계%겁한재하%송라전%공제긴라전
design for the changing temperature of bolt%limit load%loose bolt%bolt which is controlled
针对温度影响螺栓强度设计的难点,详细探讨变化温度螺栓极限载荷的计算,满足该温度区间下松螺栓设计、控制紧螺栓设计的要求,可供螺栓专业设计参考.
針對溫度影響螺栓彊度設計的難點,詳細探討變化溫度螺栓極限載荷的計算,滿足該溫度區間下鬆螺栓設計、控製緊螺栓設計的要求,可供螺栓專業設計參攷.
침대온도영향라전강도설계적난점,상세탐토변화온도라전겁한재하적계산,만족해온도구간하송라전설계、공제긴라전설계적요구,가공라전전업설계삼고.
The writer outspreads a series of discussion,aiming at the difficulty of design for bolt intensity which is influenced by the temperature.Can be used by the special operator of bolt,discussing the calculation about the limit load of bolt in the changing temperature particularly,satisfying the request of the design for loose bolt and close bolt which is controlled in the low temperature.