中南大学学报(自然科学版)
中南大學學報(自然科學版)
중남대학학보(자연과학판)
JOURNAL OF CENTRAL SOUTH UNIVERSITY
2011年
9期
2663-2668
,共6页
蒋炳炎%邱庆军%翟瞻宇%申瑞霞
蔣炳炎%邱慶軍%翟瞻宇%申瑞霞
장병염%구경군%적첨우%신서하
微注射成型%气动脱模系统%透气钢%透过性能
微註射成型%氣動脫模繫統%透氣鋼%透過性能
미주사성형%기동탈모계통%투기강%투과성능
为了克服常规脱模方式下注塑件易出现表面质量低、翘曲等缺陷,提出利用透气钢实现注塑件脱模的新方法.该方法将透气钢作为气动脱模介质,使气体通过其微孔直接到达制品的底部,由于气体的等压性,可确保脱模时注塑件受到均匀的项出力,不发生传统脱模机构中引起的翘曲变形现象.为了确定脱模过程中透气钢的工作参数,采用定压差测流量的方法实验研究考虑气体可压缩性时透气钢的透过性能.研究结果表明:随着压力的增大,气体在透气钢中将发生从Darcy流动到非Darcy流动的转变,分别对这2种流动状态的透过系数和惯性系数进行分析计算,得出了这两种状态的流动方程,揭示该流体流动状态下透气钢中气体的流动规律,为这种新脱模方法的使用提供数据和理论支持.
為瞭剋服常規脫模方式下註塑件易齣現錶麵質量低、翹麯等缺陷,提齣利用透氣鋼實現註塑件脫模的新方法.該方法將透氣鋼作為氣動脫模介質,使氣體通過其微孔直接到達製品的底部,由于氣體的等壓性,可確保脫模時註塑件受到均勻的項齣力,不髮生傳統脫模機構中引起的翹麯變形現象.為瞭確定脫模過程中透氣鋼的工作參數,採用定壓差測流量的方法實驗研究攷慮氣體可壓縮性時透氣鋼的透過性能.研究結果錶明:隨著壓力的增大,氣體在透氣鋼中將髮生從Darcy流動到非Darcy流動的轉變,分彆對這2種流動狀態的透過繫數和慣性繫數進行分析計算,得齣瞭這兩種狀態的流動方程,揭示該流體流動狀態下透氣鋼中氣體的流動規律,為這種新脫模方法的使用提供數據和理論支持.
위료극복상규탈모방식하주소건역출현표면질량저、교곡등결함,제출이용투기강실현주소건탈모적신방법.해방법장투기강작위기동탈모개질,사기체통과기미공직접도체제품적저부,유우기체적등압성,가학보탈모시주소건수도균균적항출력,불발생전통탈모궤구중인기적교곡변형현상.위료학정탈모과정중투기강적공작삼수,채용정압차측류량적방법실험연구고필기체가압축성시투기강적투과성능.연구결과표명:수착압력적증대,기체재투기강중장발생종Darcy류동도비Darcy류동적전변,분별대저2충류동상태적투과계수화관성계수진행분석계산,득출료저량충상태적류동방정,게시해류체류동상태하투기강중기체적류동규률,위저충신탈모방법적사용제공수거화이론지지.