机械工程学报
機械工程學報
궤계공정학보
CHINESE JOURNAL OF MECHANICAL ENGINEERING
2009年
9期
272-278
,共7页
米林%田铁%毛星子%谭伟
米林%田鐵%毛星子%譚偉
미림%전철%모성자%담위
镁及镁合金%位错%阻尼性能%应变振幅%金属力学%G-L模型
鎂及鎂閤金%位錯%阻尼性能%應變振幅%金屬力學%G-L模型
미급미합금%위착%조니성능%응변진폭%금속역학%G-L모형
基于金属力学性质的微观理论,结合合金元素影响镁合金晶粒性质的分析结果,重点研究镁及镁合金晶体在振动变形过程中的阻尼特性机理,通过对阻尼特性机理的理论推导和试验验证,表明:其在宏观屈服前,随应变振幅增大,阻尼机理依次为位错弹性变形时的共振型阻尼、位错脱钉扎(滑移增殖)时、位错线相互纠结钉扎时和滑移带出现时的静滞后型阻尼四个机理阶段;杂质或合金元素的质量分数及分布影响位错源的数量及其平衡状态,进而影响各阶段的阻尼性能并决定各阻尼机理阶段的特征参数值.该研究为设计和制备高阻尼镁合金材料提供了理论基础.
基于金屬力學性質的微觀理論,結閤閤金元素影響鎂閤金晶粒性質的分析結果,重點研究鎂及鎂閤金晶體在振動變形過程中的阻尼特性機理,通過對阻尼特性機理的理論推導和試驗驗證,錶明:其在宏觀屈服前,隨應變振幅增大,阻尼機理依次為位錯彈性變形時的共振型阻尼、位錯脫釘扎(滑移增殖)時、位錯線相互糾結釘扎時和滑移帶齣現時的靜滯後型阻尼四箇機理階段;雜質或閤金元素的質量分數及分佈影響位錯源的數量及其平衡狀態,進而影響各階段的阻尼性能併決定各阻尼機理階段的特徵參數值.該研究為設計和製備高阻尼鎂閤金材料提供瞭理論基礎.
기우금속역학성질적미관이론,결합합금원소영향미합금정립성질적분석결과,중점연구미급미합금정체재진동변형과정중적조니특성궤리,통과대조니특성궤리적이론추도화시험험증,표명:기재굉관굴복전,수응변진폭증대,조니궤리의차위위착탄성변형시적공진형조니、위착탈정찰(활이증식)시、위착선상호규결정찰시화활이대출현시적정체후형조니사개궤리계단;잡질혹합금원소적질량분수급분포영향위착원적수량급기평형상태,진이영향각계단적조니성능병결정각조니궤리계단적특정삼수치.해연구위설계화제비고조니미합금재료제공료이론기출.