宽厚板
寬厚闆
관후판
WIDE AND HEAVY PLATE
2006年
5期
21-24
,共4页
含铌钒钛钢%连铸坯%高温延塑性%边角部裂纹
含鈮釩鈦鋼%連鑄坯%高溫延塑性%邊角部裂紋
함니범태강%련주배%고온연소성%변각부렬문
根据高温延塑性的测试和连铸坯表面温度的测定,含铌、钒、钛钢在700~900 ℃的第Ⅲ脆性温度区断面收缩率RA值较低,约在36%左右.若RA值大于40%时,高温延塑性温度为950℃,即使采用弱冷、铸坯边角部温度也不能够达到.通过测定,对制定工艺措施,改善矫直区的热塑性,减少连铸坯边角部裂纹都能有很大的帮助.
根據高溫延塑性的測試和連鑄坯錶麵溫度的測定,含鈮、釩、鈦鋼在700~900 ℃的第Ⅲ脆性溫度區斷麵收縮率RA值較低,約在36%左右.若RA值大于40%時,高溫延塑性溫度為950℃,即使採用弱冷、鑄坯邊角部溫度也不能夠達到.通過測定,對製定工藝措施,改善矯直區的熱塑性,減少連鑄坯邊角部裂紋都能有很大的幫助.
근거고온연소성적측시화련주배표면온도적측정,함니、범、태강재700~900 ℃적제Ⅲ취성온도구단면수축솔RA치교저,약재36%좌우.약RA치대우40%시,고온연소성온도위950℃,즉사채용약랭、주배변각부온도야불능구체도.통과측정,대제정공예조시,개선교직구적열소성,감소련주배변각부렬문도능유흔대적방조.