湖南大学学报(自然科学版)
湖南大學學報(自然科學版)
호남대학학보(자연과학판)
JOURNAL OF HUNAN UNIVERSITY(NATURAL SCIENCES EDITION)
2011年
12期
46-51
,共6页
李落星%何凤亿%刘筱%周佳
李落星%何鳳億%劉篠%週佳
리락성%하봉억%류소%주가
L-J微观组织模型%微观组织模拟%动态再结晶%位错密度
L-J微觀組織模型%微觀組織模擬%動態再結晶%位錯密度
L-J미관조직모형%미관조직모의%동태재결정%위착밀도
在Gleeble-1500热压缩实验机上对AM80-0.2St-1.5Ca锾合金进行高温压缩实验,得到了该合金在温度为300~450℃、应变速率为0.01~1 s-1条件下的流变应力曲线.结合改进的LaasraouiJonas(L-J)位错密度模型和Kock- Mecking(K- M)位错密度模型,获得AM80-0.2St-1.5Ca镁合金在改进的L-J位错密度模型中的应变硬化参数和应变软化参数,建立该合金的动态再结晶模型.利用DEFORM-3D软件,实现了对AM80-0.2Sr-1.5Ca镁合金在450℃热压缩实验时微观组织演变和位错密度变化过程的有限元模拟,并与实际热压缩实验微观组织进行对比.研究结果表明:在相同的温度和应变量下,应变速率较低时,AM80-0.2Sr-1.5Ca镁合金组织粗大且晶粒分布不均,随着应变速率增大,再结晶组织细小均匀.模拟与实验结果一致,说明求解的应变硬化参数和应变软化参数准确,所建立的动态再结晶模型能准确预测该合金高温压缩过程动态再结晶过程.
在Gleeble-1500熱壓縮實驗機上對AM80-0.2St-1.5Ca鍰閤金進行高溫壓縮實驗,得到瞭該閤金在溫度為300~450℃、應變速率為0.01~1 s-1條件下的流變應力麯線.結閤改進的LaasraouiJonas(L-J)位錯密度模型和Kock- Mecking(K- M)位錯密度模型,穫得AM80-0.2St-1.5Ca鎂閤金在改進的L-J位錯密度模型中的應變硬化參數和應變軟化參數,建立該閤金的動態再結晶模型.利用DEFORM-3D軟件,實現瞭對AM80-0.2Sr-1.5Ca鎂閤金在450℃熱壓縮實驗時微觀組織縯變和位錯密度變化過程的有限元模擬,併與實際熱壓縮實驗微觀組織進行對比.研究結果錶明:在相同的溫度和應變量下,應變速率較低時,AM80-0.2Sr-1.5Ca鎂閤金組織粗大且晶粒分佈不均,隨著應變速率增大,再結晶組織細小均勻.模擬與實驗結果一緻,說明求解的應變硬化參數和應變軟化參數準確,所建立的動態再結晶模型能準確預測該閤金高溫壓縮過程動態再結晶過程.
재Gleeble-1500열압축실험궤상대AM80-0.2St-1.5Ca환합금진행고온압축실험,득도료해합금재온도위300~450℃、응변속솔위0.01~1 s-1조건하적류변응력곡선.결합개진적LaasraouiJonas(L-J)위착밀도모형화Kock- Mecking(K- M)위착밀도모형,획득AM80-0.2St-1.5Ca미합금재개진적L-J위착밀도모형중적응변경화삼수화응변연화삼수,건립해합금적동태재결정모형.이용DEFORM-3D연건,실현료대AM80-0.2Sr-1.5Ca미합금재450℃열압축실험시미관조직연변화위착밀도변화과정적유한원모의,병여실제열압축실험미관조직진행대비.연구결과표명:재상동적온도화응변량하,응변속솔교저시,AM80-0.2Sr-1.5Ca미합금조직조대차정립분포불균,수착응변속솔증대,재결정조직세소균균.모의여실험결과일치,설명구해적응변경화삼수화응변연화삼수준학,소건립적동태재결정모형능준학예측해합금고온압축과정동태재결정과정.