功能材料
功能材料
공능재료
JOURNAL OF FUNCTIONAL MATERIALS
2003年
4期
433-435
,共3页
ZnO%sol-gel%热分析%红外光谱分析
ZnO%sol-gel%熱分析%紅外光譜分析
ZnO%sol-gel%열분석%홍외광보분석
应用sol-gel技术,在普通载玻片上制备出透明的ZnO薄膜.由于醋酸锌前驱体在醇中的溶解度小,因此制备过程中,选用了质子化能很强的物质(如乙醇胺)改变了其在醇中的溶解度.本文还通过热分析、红外光谱等手段分析了不同温度下ZnO的sol-gel热分解过程,并应用AFM、X射线衍射和UV-Vis吸收光谱对sol-gel路线制得的薄膜进行表征.实验结果表明:二水醋酸锌-单乙醇胺-异丙醇体系sol-gel的热分解过程与纯二水醋酸锌过程的分解大相径庭.ZnO薄膜的sol-gel的分解趋于一步完成.预处理温度对ZnO薄膜的性能有显著影响.只有通过控制试验条件,才能保证ZnO薄膜的透光率.
應用sol-gel技術,在普通載玻片上製備齣透明的ZnO薄膜.由于醋痠鋅前驅體在醇中的溶解度小,因此製備過程中,選用瞭質子化能很彊的物質(如乙醇胺)改變瞭其在醇中的溶解度.本文還通過熱分析、紅外光譜等手段分析瞭不同溫度下ZnO的sol-gel熱分解過程,併應用AFM、X射線衍射和UV-Vis吸收光譜對sol-gel路線製得的薄膜進行錶徵.實驗結果錶明:二水醋痠鋅-單乙醇胺-異丙醇體繫sol-gel的熱分解過程與純二水醋痠鋅過程的分解大相徑庭.ZnO薄膜的sol-gel的分解趨于一步完成.預處理溫度對ZnO薄膜的性能有顯著影響.隻有通過控製試驗條件,纔能保證ZnO薄膜的透光率.
응용sol-gel기술,재보통재파편상제비출투명적ZnO박막.유우작산자전구체재순중적용해도소,인차제비과정중,선용료질자화능흔강적물질(여을순알)개변료기재순중적용해도.본문환통과열분석、홍외광보등수단분석료불동온도하ZnO적sol-gel열분해과정,병응용AFM、X사선연사화UV-Vis흡수광보대sol-gel로선제득적박막진행표정.실험결과표명:이수작산자-단을순알-이병순체계sol-gel적열분해과정여순이수작산자과정적분해대상경정.ZnO박막적sol-gel적분해추우일보완성.예처리온도대ZnO박막적성능유현저영향.지유통과공제시험조건,재능보증ZnO박막적투광솔.