燃料化学学报
燃料化學學報
연료화학학보
JOURNAL OF FUEL CHEMISTRY AND TECHNOLOGY
2011年
11期
876-880
,共5页
张志远%田建华%单忠强%梁宝臣
張誌遠%田建華%單忠彊%樑寶臣
장지원%전건화%단충강%량보신
质子交换膜燃料电池%CCM%有机溶剂%喷涂沉积
質子交換膜燃料電池%CCM%有機溶劑%噴塗沉積
질자교환막연료전지%CCM%유궤용제%분도침적
采用直接喷涂法将催化剂涂覆在质子交换膜上形成CCM(catalyst coated membrane),CCM与碳纸扩散层组成膜电极用于质子交换膜燃料电池.制备CCM的混合液由质量分数20%的Pt/C催化剂、质量分数5%的Nafion溶液、有机溶剂和水组成.不同的有机溶剂(乙醇、异丙醇和叔丁醇)、有机溶剂的含量、溶剂的挥发速率直接影响所制备的CCM孔结构,进而影响膜电极的电化学性能.采用扫描电镜(SEM)表征了膜电极的表面形貌和孔结构;采用单体质子交换膜燃料电池(PEMFC)的电流密度-电压曲线评价了膜电极的极化特性.实验结果表明,以异丙醇为溶剂,异丙醇与Nafion溶液的质量比为4.28,在 50℃~75℃制备的CCM具有良好的孔结构和膜电极性能.
採用直接噴塗法將催化劑塗覆在質子交換膜上形成CCM(catalyst coated membrane),CCM與碳紙擴散層組成膜電極用于質子交換膜燃料電池.製備CCM的混閤液由質量分數20%的Pt/C催化劑、質量分數5%的Nafion溶液、有機溶劑和水組成.不同的有機溶劑(乙醇、異丙醇和叔丁醇)、有機溶劑的含量、溶劑的揮髮速率直接影響所製備的CCM孔結構,進而影響膜電極的電化學性能.採用掃描電鏡(SEM)錶徵瞭膜電極的錶麵形貌和孔結構;採用單體質子交換膜燃料電池(PEMFC)的電流密度-電壓麯線評價瞭膜電極的極化特性.實驗結果錶明,以異丙醇為溶劑,異丙醇與Nafion溶液的質量比為4.28,在 50℃~75℃製備的CCM具有良好的孔結構和膜電極性能.
채용직접분도법장최화제도복재질자교환막상형성CCM(catalyst coated membrane),CCM여탄지확산층조성막전겁용우질자교환막연료전지.제비CCM적혼합액유질량분수20%적Pt/C최화제、질량분수5%적Nafion용액、유궤용제화수조성.불동적유궤용제(을순、이병순화숙정순)、유궤용제적함량、용제적휘발속솔직접영향소제비적CCM공결구,진이영향막전겁적전화학성능.채용소묘전경(SEM)표정료막전겁적표면형모화공결구;채용단체질자교환막연료전지(PEMFC)적전류밀도-전압곡선평개료막전겁적겁화특성.실험결과표명,이이병순위용제,이병순여Nafion용액적질량비위4.28,재 50℃~75℃제비적CCM구유량호적공결구화막전겁성능.