无机盐工业
無機鹽工業
무궤염공업
INORGANIC CHEMICALS INDUSTRY
2009年
8期
24-26
,共3页
韩亚楠%翟学良%吴江%申玉双
韓亞楠%翟學良%吳江%申玉雙
한아남%적학량%오강%신옥쌍
钛酸锶铅%薄膜%溶胶-凝胶%晶胞参数
鈦痠鍶鉛%薄膜%溶膠-凝膠%晶胞參數
태산송연%박막%용효-응효%정포삼수
strontium - doped plumbum titanate%thin films%sol-gel%crystal lattice parameter
钛酸锶铅(PST)薄膜是一类重要的铁电薄膜材料.采用溶胶-凝胶法在硅(100)衬底上制备了钛酸锶铅薄膜.利用X射线衍射(XRD)、原子力显微镜(AFM)等表征手段,表征了不同锶掺杂量及不同退火温度对薄膜结晶性能的影响.通过实验发现:锶掺杂对薄膜的微观结构和表面形貌有重要的影响.由XRD谱图发现,随着锶掺入量的增加,Pb 1-xSrxTiO3薄膜中的晶轴比、晶胞体积都逐渐减小,晶化温度降低.通过AFM发现,相同掺锶量的薄膜随着退火温度的升高,结晶性能增强,颗粒增大,粗糙度增加.
鈦痠鍶鉛(PST)薄膜是一類重要的鐵電薄膜材料.採用溶膠-凝膠法在硅(100)襯底上製備瞭鈦痠鍶鉛薄膜.利用X射線衍射(XRD)、原子力顯微鏡(AFM)等錶徵手段,錶徵瞭不同鍶摻雜量及不同退火溫度對薄膜結晶性能的影響.通過實驗髮現:鍶摻雜對薄膜的微觀結構和錶麵形貌有重要的影響.由XRD譜圖髮現,隨著鍶摻入量的增加,Pb 1-xSrxTiO3薄膜中的晶軸比、晶胞體積都逐漸減小,晶化溫度降低.通過AFM髮現,相同摻鍶量的薄膜隨著退火溫度的升高,結晶性能增彊,顆粒增大,粗糙度增加.
태산송연(PST)박막시일류중요적철전박막재료.채용용효-응효법재규(100)츤저상제비료태산송연박막.이용X사선연사(XRD)、원자력현미경(AFM)등표정수단,표정료불동송참잡량급불동퇴화온도대박막결정성능적영향.통과실험발현:송참잡대박막적미관결구화표면형모유중요적영향.유XRD보도발현,수착송참입량적증가,Pb 1-xSrxTiO3박막중적정축비、정포체적도축점감소,정화온도강저.통과AFM발현,상동참송량적박막수착퇴화온도적승고,결정성능증강,과립증대,조조도증가.
Plumbum strontium titanate (PST) thin film is a kind of important ferroelectric thin film.Strontium - doped plumbum titanate was grown on Si(100) substrate by sol-gel method.Effect of different strontium - doped contents and annealing temperatures on crystallization properties of the films were investigated by XRD and AFM etc..Results showed that strontium - doped content had great effect on microstructure and morphology of the films.The c/a,unit cell volume,and crystallization temperature were all decreased with the increasing of strontium - doped content from XRD spectrogram.In addition,AFM analysis showed that as the increasing of annealing temperature,crystallization properties were promoted,and particle size and roughness of the films were increased.