轻合金加工技术
輕閤金加工技術
경합금가공기술
LIGHT ALLOY FABRICATION TECHNOLOGY
2008年
8期
15-18
,共4页
陈刚%范培耕%彭晓东%曹鹏军%蔡苇
陳剛%範培耕%彭曉東%曹鵬軍%蔡葦
진강%범배경%팽효동%조붕군%채위
AZ91镁合金%Sr%显微组织%热处理%力学性能
AZ91鎂閤金%Sr%顯微組織%熱處理%力學性能
AZ91미합금%Sr%현미조직%열처리%역학성능
借助金相显微镜和扫描电镜研究了Sr对AZ91镁合金铸态组织、热处理后的微观组织及其力学性能的影响.研究结果表明,少量Sr(w(Sr)=0.3%~0.5%)加入可显著细化AZ91镁合金的晶粒,但w(Sr)进一步增加到0.8%时,合金晶粒有粗化倾向,合金组织中出现杆状Al4Sr相.经固溶处理后,合金组织中β Mg17Al12相几乎全部溶于α Mg基体中,金属间化合物Mg17Sr2及 Al4Sr部分溶于基体中,时效处理后从基体中析出,分布弥散、均匀.合金的强度和硬度随Sr含量增加,先增大后减小.其力学性能的变化与Sr加入量和晶界上脆性相的数量有关.
藉助金相顯微鏡和掃描電鏡研究瞭Sr對AZ91鎂閤金鑄態組織、熱處理後的微觀組織及其力學性能的影響.研究結果錶明,少量Sr(w(Sr)=0.3%~0.5%)加入可顯著細化AZ91鎂閤金的晶粒,但w(Sr)進一步增加到0.8%時,閤金晶粒有粗化傾嚮,閤金組織中齣現桿狀Al4Sr相.經固溶處理後,閤金組織中β Mg17Al12相幾乎全部溶于α Mg基體中,金屬間化閤物Mg17Sr2及 Al4Sr部分溶于基體中,時效處理後從基體中析齣,分佈瀰散、均勻.閤金的彊度和硬度隨Sr含量增加,先增大後減小.其力學性能的變化與Sr加入量和晶界上脆性相的數量有關.
차조금상현미경화소묘전경연구료Sr대AZ91미합금주태조직、열처리후적미관조직급기역학성능적영향.연구결과표명,소량Sr(w(Sr)=0.3%~0.5%)가입가현저세화AZ91미합금적정립,단w(Sr)진일보증가도0.8%시,합금정립유조화경향,합금조직중출현간상Al4Sr상.경고용처리후,합금조직중β Mg17Al12상궤호전부용우α Mg기체중,금속간화합물Mg17Sr2급 Al4Sr부분용우기체중,시효처리후종기체중석출,분포미산、균균.합금적강도화경도수Sr함량증가,선증대후감소.기역학성능적변화여Sr가입량화정계상취성상적수량유관.