光电工程
光電工程
광전공정
OPTO-ELECTRONIC ENGINEERING
2009年
1期
73-77
,共5页
白光LED%荧光粉%光谱测量%效率%最佳匹配
白光LED%熒光粉%光譜測量%效率%最佳匹配
백광LED%형광분%광보측량%효솔%최가필배
white LED%phosphor%spectrum measurement%efficiency%optimal matching
为获得高效率的白光LED,得到荧光粉和芯片的最佳匹配,本文提出了一种新颖的白光LED荧光粉测量系统和分析方法.该方法根据荧光粉测量原理,采用单色光激发荧光粉,获得荧光粉的激发光谱特性.由单波长激发的光谱组合可以得到荧光粉的三维光谱特性,荧光粉光谱与LED芯片光谱匹配可以模拟白光LED光谱.分析了荧光粉在单波长及光谱激发条件下的效率.实验结果表明,该测量系统和分析方法可以确定荧光粉和兰光LED芯片的最佳匹配,从而为获得高效率白光LED奠定了良好的基础.
為穫得高效率的白光LED,得到熒光粉和芯片的最佳匹配,本文提齣瞭一種新穎的白光LED熒光粉測量繫統和分析方法.該方法根據熒光粉測量原理,採用單色光激髮熒光粉,穫得熒光粉的激髮光譜特性.由單波長激髮的光譜組閤可以得到熒光粉的三維光譜特性,熒光粉光譜與LED芯片光譜匹配可以模擬白光LED光譜.分析瞭熒光粉在單波長及光譜激髮條件下的效率.實驗結果錶明,該測量繫統和分析方法可以確定熒光粉和蘭光LED芯片的最佳匹配,從而為穫得高效率白光LED奠定瞭良好的基礎.
위획득고효솔적백광LED,득도형광분화심편적최가필배,본문제출료일충신영적백광LED형광분측량계통화분석방법.해방법근거형광분측량원리,채용단색광격발형광분,획득형광분적격발광보특성.유단파장격발적광보조합가이득도형광분적삼유광보특성,형광분광보여LED심편광보필배가이모의백광LED광보.분석료형광분재단파장급광보격발조건하적효솔.실험결과표명,해측량계통화분석방법가이학정형광분화란광LED심편적최가필배,종이위획득고효솔백광LED전정료량호적기출.
In order to achieve high-efficiency white LEDs and get the optimal matching between phosphors and LED chips,a novel moasuremcnt system and an analytical method for white LED phosphors were proposed.According to the measurement principles of phosphor,monochromatic light was adopted to excite the phosphor,and phosphors'excitation characteristics were obtained.With each single excitation spectrums,three-dimeusional spectral power distribution for a phosphor was achieved,and the spectrum ofwhite LED was acquired by combination with the spectrum of blue LED chip.Luminous efficiencies of the phosphor under different excitation conditions were analyzed.The experimental results show that the measurement systemand analytical method are feasible for choosing optimalmatching between phosphors and LED chips,and Can establish a good foundation for achieving high-efficiency white LED.