测绘工程
測繪工程
측회공정
ENGINEERING OF SURVEYING AND MAPPING
2009年
6期
22-24
,共3页
P码%伪距%相位平滑伪距%单点定位
P碼%偽距%相位平滑偽距%單點定位
P마%위거%상위평활위거%단점정위
针对C/A码、P1码、P2码伪距的精度问题,利用郑州J3JG站实测数据进行计算,结果表明:该站接收机产生3种伪距的精度从高到低依次为P1码、C/A码、P2码.在此基础上,利用相位观测值对精度最高的P1码伪距进行平滑,采用自编程序,对相位平滑Pl码伪距的单点定位精度进行研究.实验结果表明:相位平滑P1码伪距的单点定位结果较P1码伪距的定位结果更稳定,X、Y、Z方向的平均误差和RMS值也较P1码伪距有明显提高.
針對C/A碼、P1碼、P2碼偽距的精度問題,利用鄭州J3JG站實測數據進行計算,結果錶明:該站接收機產生3種偽距的精度從高到低依次為P1碼、C/A碼、P2碼.在此基礎上,利用相位觀測值對精度最高的P1碼偽距進行平滑,採用自編程序,對相位平滑Pl碼偽距的單點定位精度進行研究.實驗結果錶明:相位平滑P1碼偽距的單點定位結果較P1碼偽距的定位結果更穩定,X、Y、Z方嚮的平均誤差和RMS值也較P1碼偽距有明顯提高.
침대C/A마、P1마、P2마위거적정도문제,이용정주J3JG참실측수거진행계산,결과표명:해참접수궤산생3충위거적정도종고도저의차위P1마、C/A마、P2마.재차기출상,이용상위관측치대정도최고적P1마위거진행평활,채용자편정서,대상위평활Pl마위거적단점정위정도진행연구.실험결과표명:상위평활P1마위거적단점정위결과교P1마위거적정위결과경은정,X、Y、Z방향적평균오차화RMS치야교P1마위거유명현제고.