木材加工机械
木材加工機械
목재가공궤계
WOOD PROCESSING MACHINERY
2007年
6期
16-20
,共5页
江进学%范东斌%李建章%母军
江進學%範東斌%李建章%母軍
강진학%범동빈%리건장%모군
茶叶废料%中密度纤维板%甲醛释放量
茶葉廢料%中密度纖維闆%甲醛釋放量
다협폐료%중밀도섬유판%갑철석방량
通过正交实验与结果分析,研究了茶叶废料添加量以及不同工艺条件对复合中密度纤维板的静曲强度、内结合强度、甲醛释放量的影响,并确定了制板的较佳工艺条件:茶叶废料加入量为10%,热压温度185℃,热压时间为10min.实验结果表明,茶叶废料可有效地降低中密度纤维板的甲醛释放量;茶叶废料加入量为10%时,对纤维板的静曲强度与内结合强度影响不大,产品的静曲强度和内结合强度均可达到国家标准.
通過正交實驗與結果分析,研究瞭茶葉廢料添加量以及不同工藝條件對複閤中密度纖維闆的靜麯彊度、內結閤彊度、甲醛釋放量的影響,併確定瞭製闆的較佳工藝條件:茶葉廢料加入量為10%,熱壓溫度185℃,熱壓時間為10min.實驗結果錶明,茶葉廢料可有效地降低中密度纖維闆的甲醛釋放量;茶葉廢料加入量為10%時,對纖維闆的靜麯彊度與內結閤彊度影響不大,產品的靜麯彊度和內結閤彊度均可達到國傢標準.
통과정교실험여결과분석,연구료다협폐료첨가량이급불동공예조건대복합중밀도섬유판적정곡강도、내결합강도、갑철석방량적영향,병학정료제판적교가공예조건:다협폐료가입량위10%,열압온도185℃,열압시간위10min.실험결과표명,다협폐료가유효지강저중밀도섬유판적갑철석방량;다협폐료가입량위10%시,대섬유판적정곡강도여내결합강도영향불대,산품적정곡강도화내결합강도균가체도국가표준.