硅酸盐通报
硅痠鹽通報
규산염통보
BULLETIN OF THE CHINESE CERAMIC SOCIETY
2007年
4期
685-690
,共6页
X射线衍射%C3S%SO3%形成动力学%速率常数
X射線衍射%C3S%SO3%形成動力學%速率常數
X사선연사%C3S%SO3%형성동역학%속솔상수
通过化学分析,应用等温煅烧的方法对不同SO3掺量为(0%,1%,2%,3%,3.5%,5%)的C3S矿物形成过程从动力学角度进行了系统探讨.通过拟合得到了C3S矿物形成的动力学模型,并根据该动力学模型对不同SO3掺量下C3S矿物形成的速率常数进行了计算.结果表明:在1450℃,不同SO3掺量下,C3S矿物形成由三维球形对称扩散动力学模型f(a)=(1-3√(x+y)2控制;随着SO3加入量的增加,C3S矿物形成的速率常数呈非线性变化;从游离CaO的含量和反应速率常数的角度来说,SO3的加入有利于C3S的形成.并且SO3加入量的增加有利于C3S的多相体M1的稳定.
通過化學分析,應用等溫煅燒的方法對不同SO3摻量為(0%,1%,2%,3%,3.5%,5%)的C3S礦物形成過程從動力學角度進行瞭繫統探討.通過擬閤得到瞭C3S礦物形成的動力學模型,併根據該動力學模型對不同SO3摻量下C3S礦物形成的速率常數進行瞭計算.結果錶明:在1450℃,不同SO3摻量下,C3S礦物形成由三維毬形對稱擴散動力學模型f(a)=(1-3√(x+y)2控製;隨著SO3加入量的增加,C3S礦物形成的速率常數呈非線性變化;從遊離CaO的含量和反應速率常數的角度來說,SO3的加入有利于C3S的形成.併且SO3加入量的增加有利于C3S的多相體M1的穩定.
통과화학분석,응용등온단소적방법대불동SO3참량위(0%,1%,2%,3%,3.5%,5%)적C3S광물형성과정종동역학각도진행료계통탐토.통과의합득도료C3S광물형성적동역학모형,병근거해동역학모형대불동SO3참량하C3S광물형성적속솔상수진행료계산.결과표명:재1450℃,불동SO3참량하,C3S광물형성유삼유구형대칭확산동역학모형f(a)=(1-3√(x+y)2공제;수착SO3가입량적증가,C3S광물형성적속솔상수정비선성변화;종유리CaO적함량화반응속솔상수적각도래설,SO3적가입유리우C3S적형성.병차SO3가입량적증가유리우C3S적다상체M1적은정.