矿业工程研究
礦業工程研究
광업공정연구
MINERAL ENGINEEERING RESEACH
2011年
2期
53-56
,共4页
邓景新%郭小定%陈晓可%程正梅%汤玉龙%唐慧
鄧景新%郭小定%陳曉可%程正梅%湯玉龍%唐慧
산경신%곽소정%진효가%정정매%탕옥룡%당혜
矿用机车%直流斩波%单片机与PLC%控制%软件
礦用機車%直流斬波%單片機與PLC%控製%軟件
광용궤차%직류참파%단편궤여PLC%공제%연건
传统矿用机车的试验电源的调压过程是通过控制电动调压器调节出不同等级的三相交流电,再经过不可控整流桥得到对应的不同等级的直流电压,该试验电源在实际应用中存在稳压效果差、发生电机堵转,电压响应速速慢等问题.通过对传统试验电源存在问题进行分析后,提出了一种新型的直流降压斩波电源方案,即采用直流斩波原理与电容充放电稳压原理相结合的方法进行稳压.软件中对PWM的占空比控制用的是工业上常用的增量式PI算法,该算法简单、鲁棒性好、可靠性高;单片机与PLC通信采用串口通信,为了提高数据传输的可靠性,通信数据块采用CRC校验.经过对该方案的反复实践,实验结果表明:新型直流降压斩波电源稳压效果良好、响应速度快,安全性高.
傳統礦用機車的試驗電源的調壓過程是通過控製電動調壓器調節齣不同等級的三相交流電,再經過不可控整流橋得到對應的不同等級的直流電壓,該試驗電源在實際應用中存在穩壓效果差、髮生電機堵轉,電壓響應速速慢等問題.通過對傳統試驗電源存在問題進行分析後,提齣瞭一種新型的直流降壓斬波電源方案,即採用直流斬波原理與電容充放電穩壓原理相結閤的方法進行穩壓.軟件中對PWM的佔空比控製用的是工業上常用的增量式PI算法,該算法簡單、魯棒性好、可靠性高;單片機與PLC通信採用串口通信,為瞭提高數據傳輸的可靠性,通信數據塊採用CRC校驗.經過對該方案的反複實踐,實驗結果錶明:新型直流降壓斬波電源穩壓效果良好、響應速度快,安全性高.
전통광용궤차적시험전원적조압과정시통과공제전동조압기조절출불동등급적삼상교류전,재경과불가공정류교득도대응적불동등급적직류전압,해시험전원재실제응용중존재은압효과차、발생전궤도전,전압향응속속만등문제.통과대전통시험전원존재문제진행분석후,제출료일충신형적직류강압참파전원방안,즉채용직류참파원리여전용충방전은압원리상결합적방법진행은압.연건중대PWM적점공비공제용적시공업상상용적증량식PI산법,해산법간단、로봉성호、가고성고;단편궤여PLC통신채용천구통신,위료제고수거전수적가고성,통신수거괴채용CRC교험.경과대해방안적반복실천,실험결과표명:신형직류강압참파전원은압효과량호、향응속도쾌,안전성고.