合成橡胶工业
閤成橡膠工業
합성상효공업
CHINA SYNTHETIC RUBBER INDUSTRY
2007年
2期
138-142
,共5页
粉末天然橡胶%高耐磨炉黑%氧化钐%力学性能
粉末天然橡膠%高耐磨爐黑%氧化釤%力學性能
분말천연상효%고내마로흑%양화삼%역학성능
高耐磨炉黑(HAF)填充型粉末天然橡胶(NR)[P(NR/HAF)]硫化胶的缺点是300%定伸应力低,因此,采用Sm2O3掺杂HAF(HAF-Sm),用凝聚共沉法制备了掺杂Sm2O3的HAF填充型粉末天然橡胶(NR)[P(NR/HAF-Sm)],研究了其硫化胶的力学性能与Sm2O3及HAF用量之间的关系.结果表明:在炭黑用量为10~100份,当炭黑用量相同、Sm2O3的质量分数为HAF的3%时,其P(NR/HAF-Sm)硫化胶的300%定伸应力显著高于P(NR/HAF)硫化胶,而与块状NR(MNR)/HAF机械混炼胶料硫化胶的相近;其拉伸强度、100%定伸应力和撕裂强度明显高于P(NR/HAF)及MNR/HAF硫化胶.这说明适量的Sm2O3掺杂HAF可显著提高炭黑填充型粉末NR硫化胶的300%定伸应力及其他力学性能.
高耐磨爐黑(HAF)填充型粉末天然橡膠(NR)[P(NR/HAF)]硫化膠的缺點是300%定伸應力低,因此,採用Sm2O3摻雜HAF(HAF-Sm),用凝聚共沉法製備瞭摻雜Sm2O3的HAF填充型粉末天然橡膠(NR)[P(NR/HAF-Sm)],研究瞭其硫化膠的力學性能與Sm2O3及HAF用量之間的關繫.結果錶明:在炭黑用量為10~100份,噹炭黑用量相同、Sm2O3的質量分數為HAF的3%時,其P(NR/HAF-Sm)硫化膠的300%定伸應力顯著高于P(NR/HAF)硫化膠,而與塊狀NR(MNR)/HAF機械混煉膠料硫化膠的相近;其拉伸彊度、100%定伸應力和撕裂彊度明顯高于P(NR/HAF)及MNR/HAF硫化膠.這說明適量的Sm2O3摻雜HAF可顯著提高炭黑填充型粉末NR硫化膠的300%定伸應力及其他力學性能.
고내마로흑(HAF)전충형분말천연상효(NR)[P(NR/HAF)]류화효적결점시300%정신응력저,인차,채용Sm2O3참잡HAF(HAF-Sm),용응취공침법제비료참잡Sm2O3적HAF전충형분말천연상효(NR)[P(NR/HAF-Sm)],연구료기류화효적역학성능여Sm2O3급HAF용량지간적관계.결과표명:재탄흑용량위10~100빈,당탄흑용량상동、Sm2O3적질량분수위HAF적3%시,기P(NR/HAF-Sm)류화효적300%정신응력현저고우P(NR/HAF)류화효,이여괴상NR(MNR)/HAF궤계혼련효료류화효적상근;기랍신강도、100%정신응력화시렬강도명현고우P(NR/HAF)급MNR/HAF류화효.저설명괄량적Sm2O3참잡HAF가현저제고탄흑전충형분말NR류화효적300%정신응력급기타역학성능.