高技术通讯
高技術通訊
고기술통신
HIGH TECHNOLOGY LETTERS
2009年
3期
247-252
,共6页
算术编码%分步式%图像压缩%关键路径
算術編碼%分步式%圖像壓縮%關鍵路徑
산술편마%분보식%도상압축%관건로경
针对MQ编码的环路反馈结构的高复杂度对实现快速图像压缩硬件的限制,研究分析了MQ编码的基本算法,提出了"区间编码"和"位填充"之间有一定的独立性,可用先进先出(FIFO)管道连接后并行处理的思想,并设计了一种适合MQ编码算法特点的异步流水线与有限状态机(FSM)相结合的分步式并行结构.该结构简单合理,FIFO管道的引入可支持异步流水电路,FSM的动态优化策略有效地防止了流水的阻塞,复杂环路的逐层分解显著降低了编码的反馈效应,根据程序运行过程中的数据操作动态特征,利用概率统计规律和状态机分割减小了系统的关键路径长度.该结构的资源利用率高,现场可编程门阵列(FPGA)原型系统最高时钟工作频率为233MHz,吞吐率与其它同类结构相比有明显提高,达到116.5Mbps.
針對MQ編碼的環路反饋結構的高複雜度對實現快速圖像壓縮硬件的限製,研究分析瞭MQ編碼的基本算法,提齣瞭"區間編碼"和"位填充"之間有一定的獨立性,可用先進先齣(FIFO)管道連接後併行處理的思想,併設計瞭一種適閤MQ編碼算法特點的異步流水線與有限狀態機(FSM)相結閤的分步式併行結構.該結構簡單閤理,FIFO管道的引入可支持異步流水電路,FSM的動態優化策略有效地防止瞭流水的阻塞,複雜環路的逐層分解顯著降低瞭編碼的反饋效應,根據程序運行過程中的數據操作動態特徵,利用概率統計規律和狀態機分割減小瞭繫統的關鍵路徑長度.該結構的資源利用率高,現場可編程門陣列(FPGA)原型繫統最高時鐘工作頻率為233MHz,吞吐率與其它同類結構相比有明顯提高,達到116.5Mbps.
침대MQ편마적배로반궤결구적고복잡도대실현쾌속도상압축경건적한제,연구분석료MQ편마적기본산법,제출료"구간편마"화"위전충"지간유일정적독립성,가용선진선출(FIFO)관도련접후병행처리적사상,병설계료일충괄합MQ편마산법특점적이보류수선여유한상태궤(FSM)상결합적분보식병행결구.해결구간단합리,FIFO관도적인입가지지이보류수전로,FSM적동태우화책략유효지방지료류수적조새,복잡배로적축층분해현저강저료편마적반궤효응,근거정서운행과정중적수거조작동태특정,이용개솔통계규률화상태궤분할감소료계통적관건로경장도.해결구적자원이용솔고,현장가편정문진렬(FPGA)원형계통최고시종공작빈솔위233MHz,탄토솔여기타동류결구상비유명현제고,체도116.5Mbps.