包装工程
包裝工程
포장공정
PACKAGING ENGINEERING
2007年
11期
34-37
,共4页
激光熔覆%瓦楞辊%复合涂层%性能
激光鎔覆%瓦楞輥%複閤塗層%性能
격광용복%와릉곤%복합도층%성능
针对瓦楞辊工况下强烈的干摩擦磨粒磨损,开发了一种专门针对瓦楞辊的旨在大幅提高耐磨性的激光熔覆材料体系.通过工艺优化,在新辊或失效辊表面激光熔覆制备了无气孔裂纹等缺陷、厚度大于0.4mm的耐磨涂层.熔覆层与基体呈冶金结合,平均显微硬度915HV0.2.该工艺已经用于工业生产,实践证明该技术相对于已有的方法如氮化、激光相变硬化、镀铬、喷涂碳化钨在性能、成本、寿命、可修复性等方面具有综合优势,有广阔的应用前景.
針對瓦楞輥工況下彊烈的榦摩抆磨粒磨損,開髮瞭一種專門針對瓦楞輥的旨在大幅提高耐磨性的激光鎔覆材料體繫.通過工藝優化,在新輥或失效輥錶麵激光鎔覆製備瞭無氣孔裂紋等缺陷、厚度大于0.4mm的耐磨塗層.鎔覆層與基體呈冶金結閤,平均顯微硬度915HV0.2.該工藝已經用于工業生產,實踐證明該技術相對于已有的方法如氮化、激光相變硬化、鍍鉻、噴塗碳化鎢在性能、成本、壽命、可脩複性等方麵具有綜閤優勢,有廣闊的應用前景.
침대와릉곤공황하강렬적간마찰마립마손,개발료일충전문침대와릉곤적지재대폭제고내마성적격광용복재료체계.통과공예우화,재신곤혹실효곤표면격광용복제비료무기공렬문등결함、후도대우0.4mm적내마도층.용복층여기체정야금결합,평균현미경도915HV0.2.해공예이경용우공업생산,실천증명해기술상대우이유적방법여담화、격광상변경화、도락、분도탄화오재성능、성본、수명、가수복성등방면구유종합우세,유엄활적응용전경.