红外与激光工程
紅外與激光工程
홍외여격광공정
INFRARED AND LASER ENGINEERING
2008年
3期
464-466
,共3页
丁征%衣学斌%梁田%齐文宗
丁徵%衣學斌%樑田%齊文宗
정정%의학빈%량전%제문종
热键合%被动调Q%短脉冲%激光器
熱鍵閤%被動調Q%短脈遲%激光器
열건합%피동조Q%단맥충%격광기
对LD端面泵浦Nd:YAG/Gr4+:YAG热键合调Q激光器进行了实验研究.采用φ3×12mm晶体,端面镀膜方式在晶体两端直接构成平-平谐振腔.采用LD端面泵浦方式,分别研究了该激光器的脉冲重复频率、平均输出功率和脉冲宽度等参数随泵浦功率变化的输出特性,随着泵浦功率的增加,脉冲重复率和输出功率与泵浦功率呈线性增加,而脉冲宽度则有被压缩的趋势.当LD泵浦功率为6W时,热键合调Q激光器获得波长为1064nm、脉宽为5.3ns、平均功率为690mW的被动调Q激光脉冲输出.其光-光转换效率为11.5%,光束发散角为3.1mrad.实验结果表明,热键合激光器热效应好、可靠性高、输出光束质量高,是一种性能良好的新型一体化调Q固体激光器.
對LD耑麵泵浦Nd:YAG/Gr4+:YAG熱鍵閤調Q激光器進行瞭實驗研究.採用φ3×12mm晶體,耑麵鍍膜方式在晶體兩耑直接構成平-平諧振腔.採用LD耑麵泵浦方式,分彆研究瞭該激光器的脈遲重複頻率、平均輸齣功率和脈遲寬度等參數隨泵浦功率變化的輸齣特性,隨著泵浦功率的增加,脈遲重複率和輸齣功率與泵浦功率呈線性增加,而脈遲寬度則有被壓縮的趨勢.噹LD泵浦功率為6W時,熱鍵閤調Q激光器穫得波長為1064nm、脈寬為5.3ns、平均功率為690mW的被動調Q激光脈遲輸齣.其光-光轉換效率為11.5%,光束髮散角為3.1mrad.實驗結果錶明,熱鍵閤激光器熱效應好、可靠性高、輸齣光束質量高,是一種性能良好的新型一體化調Q固體激光器.
대LD단면빙포Nd:YAG/Gr4+:YAG열건합조Q격광기진행료실험연구.채용φ3×12mm정체,단면도막방식재정체량단직접구성평-평해진강.채용LD단면빙포방식,분별연구료해격광기적맥충중복빈솔、평균수출공솔화맥충관도등삼수수빙포공솔변화적수출특성,수착빙포공솔적증가,맥충중복솔화수출공솔여빙포공솔정선성증가,이맥충관도칙유피압축적추세.당LD빙포공솔위6W시,열건합조Q격광기획득파장위1064nm、맥관위5.3ns、평균공솔위690mW적피동조Q격광맥충수출.기광-광전환효솔위11.5%,광속발산각위3.1mrad.실험결과표명,열건합격광기열효응호、가고성고、수출광속질량고,시일충성능량호적신형일체화조Q고체격광기.