激光技术
激光技術
격광기술
LASER TECHNOLOGY
2010年
1期
17-19,40
,共4页
张芳沛%楼祺洪%李红霞%韩文杰%邢宇华%董景星%沈严%薛海中
張芳沛%樓祺洪%李紅霞%韓文傑%邢宇華%董景星%瀋嚴%薛海中
장방패%루기홍%리홍하%한문걸%형우화%동경성%침엄%설해중
激光技术%脉宽可调%等离子体开关%脉冲压缩
激光技術%脈寬可調%等離子體開關%脈遲壓縮
격광기술%맥관가조%등리자체개관%맥충압축
laser technique%width-tunable pulse%plasma shutter%pulse compression
为得到脉宽可控的355nm紫外脉冲激光输出,采用1064nm脉冲激光诱导等离子体开关技术,控制355nm激光脉冲宽度,在激光电离Cu小孔内壁表面及空气击穿共同作用下,获得了2.8ns~10ns的脉宽可调输出.讨论了1064nm单脉冲输出能量对脉宽压缩的影响,在无延时情况下得到了脉宽最短达2.8ns的脉冲激光输出.在此基础上,保持1064nm单脉冲输出能量不变,采用延时装置改变两光路间的光程差,以控制等离子体开关相对于355nm激光脉冲的形成时间,最终得到脉宽可调的脉冲激光输出.结果表明,等离子体开关结构简单、操作方便、适用范围广,是一种较好的脉冲整形手段.
為得到脈寬可控的355nm紫外脈遲激光輸齣,採用1064nm脈遲激光誘導等離子體開關技術,控製355nm激光脈遲寬度,在激光電離Cu小孔內壁錶麵及空氣擊穿共同作用下,穫得瞭2.8ns~10ns的脈寬可調輸齣.討論瞭1064nm單脈遲輸齣能量對脈寬壓縮的影響,在無延時情況下得到瞭脈寬最短達2.8ns的脈遲激光輸齣.在此基礎上,保持1064nm單脈遲輸齣能量不變,採用延時裝置改變兩光路間的光程差,以控製等離子體開關相對于355nm激光脈遲的形成時間,最終得到脈寬可調的脈遲激光輸齣.結果錶明,等離子體開關結構簡單、操作方便、適用範圍廣,是一種較好的脈遲整形手段.
위득도맥관가공적355nm자외맥충격광수출,채용1064nm맥충격광유도등리자체개관기술,공제355nm격광맥충관도,재격광전리Cu소공내벽표면급공기격천공동작용하,획득료2.8ns~10ns적맥관가조수출.토론료1064nm단맥충수출능량대맥관압축적영향,재무연시정황하득도료맥관최단체2.8ns적맥충격광수출.재차기출상,보지1064nm단맥충수출능량불변,채용연시장치개변량광로간적광정차,이공제등리자체개관상대우355nm격광맥충적형성시간,최종득도맥관가조적맥충격광수출.결과표명,등리자체개관결구간단、조작방편、괄용범위엄,시일충교호적맥충정형수단.
In order to obtain the width-tunable 355nm pulses,a 1064nm laser-induced plasma shutter was used to control the pulse width of 355nm pulses.The width tunable from 2.8ns to 10ns was obtained under the interaction of ionization of the Cu pinhole and the atmospheric breakdown.Firstly,the effect of 1064nm pulse energy on pulse compression was discussed,and the shortest output pulse with a width of 2.8ns was obtained without delay time between two laser paths.Subsequently,adopting the device for delay-time to vary the optical differences between two paths,the width-tunable 355nm laser pulses were obtained.Experimental results indicate that laser-induced plasma shutter is a better pulse-shaping means with simple configuration,convenient operation,and widespread applications.