中国有色金属学报(英文版)
中國有色金屬學報(英文版)
중국유색금속학보(영문판)
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
2011年
5期
1112-1117
,共6页
张丁非%戴庆伟%方霖%徐杏杏
張丁非%戴慶偉%方霖%徐杏杏
장정비%대경위%방림%서행행
镁合金%有限元分析%轧制%损伤
鎂閤金%有限元分析%軋製%損傷
미합금%유한원분석%알제%손상
magnesium alloys%finite element analysis%rolling%damage
研究镁合金板材轧制过程中的温度变化、边裂和轧制力,建立热-力-损伤耦合有限元模型.采用楔形试样研究压下量对温度、损伤和轧制力的影响.结果表明:随着压下量的增加,轧制力增大,镁板的温度降低:当压下量大于51.6%时,发生边裂,此时损伤值大于0.49;镁板轧制中的塑性-损伤是空洞发展、剪切变形和应变积累综合作用的结果.
研究鎂閤金闆材軋製過程中的溫度變化、邊裂和軋製力,建立熱-力-損傷耦閤有限元模型.採用楔形試樣研究壓下量對溫度、損傷和軋製力的影響.結果錶明:隨著壓下量的增加,軋製力增大,鎂闆的溫度降低:噹壓下量大于51.6%時,髮生邊裂,此時損傷值大于0.49;鎂闆軋製中的塑性-損傷是空洞髮展、剪切變形和應變積纍綜閤作用的結果.
연구미합금판재알제과정중적온도변화、변렬화알제력,건립열-력-손상우합유한원모형.채용설형시양연구압하량대온도、손상화알제력적영향.결과표명:수착압하량적증가,알제력증대,미판적온도강저:당압하량대우51.6%시,발생변렬,차시손상치대우0.49;미판알제중적소성-손상시공동발전、전절변형화응변적루종합작용적결과.
A thermal-mechanical-damage coupled finite elements model was established to investigate temperature changes, edge cracks and rolling force during rolling of magnesium alloy sheet. A cuneal sheet was also adopted to study the influence of reduction on temperature, damage and rolling force. The results show that with increasing the reduction, the rolling force increases, and the temperature of the Mg sheet decreases. Edge cracks occur when the reduction is above 51.6%, with the damage value of above 0.49. The plastic-damage in Mg sheet rolling is a result of hole development, shearing deformation and accumulative plastic strain.