传感器技术
傳感器技術
전감기기술
JOURNAL OF TRANSDUCER TECHNOLOGY
2005年
5期
69-70,76
,共3页
电解加工%传感器%间隙检测
電解加工%傳感器%間隙檢測
전해가공%전감기%간극검측
针对现有间隙检测方法存在精度低,且仅能测量平均间隙的缺点,提出一种测量最小间隙的简单方法--低电压湿对刀方法,介绍了湿对刀方法测最小加工间隙的原理,并进行了试验验证,试验结果表明:测量精度可达2μm.
針對現有間隙檢測方法存在精度低,且僅能測量平均間隙的缺點,提齣一種測量最小間隙的簡單方法--低電壓濕對刀方法,介紹瞭濕對刀方法測最小加工間隙的原理,併進行瞭試驗驗證,試驗結果錶明:測量精度可達2μm.
침대현유간극검측방법존재정도저,차부능측량평균간극적결점,제출일충측량최소간극적간단방법--저전압습대도방법,개소료습대도방법측최소가공간극적원리,병진행료시험험증,시험결과표명:측량정도가체2μm.