机床与液压
機床與液壓
궤상여액압
MACHINE TOOL & HYDRAULICS
2007年
6期
221-222,225
,共3页
滚动轴承%微坑%速度%加速度
滾動軸承%微坑%速度%加速度
곤동축승%미갱%속도%가속도
以6308轴承为例,用完全数值解法研究了表面微坑对滚动轴承振动的影响,分析了接触位移、接触振动速度、加速度随工况参数的变化.结果表明,对于表面微坑引起的接触振动,速度型检测与加速度型检测具有相同的效果;随载荷的增大、转速的降低,振动加速度增大,在微坑的边缘引起两个接触振动响应,并且这两个响应强度不一样;表面微坑的形状对接触振动有影响,微坑的斜率越大,则其引起的接触振动越剧烈.
以6308軸承為例,用完全數值解法研究瞭錶麵微坑對滾動軸承振動的影響,分析瞭接觸位移、接觸振動速度、加速度隨工況參數的變化.結果錶明,對于錶麵微坑引起的接觸振動,速度型檢測與加速度型檢測具有相同的效果;隨載荷的增大、轉速的降低,振動加速度增大,在微坑的邊緣引起兩箇接觸振動響應,併且這兩箇響應彊度不一樣;錶麵微坑的形狀對接觸振動有影響,微坑的斜率越大,則其引起的接觸振動越劇烈.
이6308축승위례,용완전수치해법연구료표면미갱대곤동축승진동적영향,분석료접촉위이、접촉진동속도、가속도수공황삼수적변화.결과표명,대우표면미갱인기적접촉진동,속도형검측여가속도형검측구유상동적효과;수재하적증대、전속적강저,진동가속도증대,재미갱적변연인기량개접촉진동향응,병차저량개향응강도불일양;표면미갱적형상대접촉진동유영향,미갱적사솔월대,칙기인기적접촉진동월극렬.