纺织器材
紡織器材
방직기재
TEXTILE ACCESSORIES
2011年
3期
10-13,53
,共5页
盖板针布%钢丝线规%火焰淬火%金相组织%氧气流量%液化气流量%针布输送速度%工艺优化
蓋闆針佈%鋼絲線規%火燄淬火%金相組織%氧氣流量%液化氣流量%針佈輸送速度%工藝優化
개판침포%강사선규%화염쉬화%금상조직%양기류량%액화기류량%침포수송속도%공예우화
为了提高盖板针布针尖部的淬火质量,即实现针尖部为细针(隐针)状马氏体、碳化物分布均匀的金相组织,以提高盖板针布的耐磨性,在金轮公司现行火焰淬火配置基础上,针对双凸面粗线径和双凸面细线径两种不同钢丝线规号的盖板针布,通过优化氧气流量、液化气流量和盖板针布输送速度,优化火焰淬火工艺.工艺优化试验结果表明,双凸面粗线径盖板针布的最佳淬火工艺为:氧气流量(83±2)mL/s,液化气流量(70±1)mL/s,针布输送速度(4.5±0.5)m/min;双凸面细线径盖板针布最佳淬火工艺为:氧气流量(79±3)mL/s,液化气流量(71±2)mL/s,针布输送速度(5.5±0.5)m/min.
為瞭提高蓋闆針佈針尖部的淬火質量,即實現針尖部為細針(隱針)狀馬氏體、碳化物分佈均勻的金相組織,以提高蓋闆針佈的耐磨性,在金輪公司現行火燄淬火配置基礎上,針對雙凸麵粗線徑和雙凸麵細線徑兩種不同鋼絲線規號的蓋闆針佈,通過優化氧氣流量、液化氣流量和蓋闆針佈輸送速度,優化火燄淬火工藝.工藝優化試驗結果錶明,雙凸麵粗線徑蓋闆針佈的最佳淬火工藝為:氧氣流量(83±2)mL/s,液化氣流量(70±1)mL/s,針佈輸送速度(4.5±0.5)m/min;雙凸麵細線徑蓋闆針佈最佳淬火工藝為:氧氣流量(79±3)mL/s,液化氣流量(71±2)mL/s,針佈輸送速度(5.5±0.5)m/min.
위료제고개판침포침첨부적쉬화질량,즉실현침첨부위세침(은침)상마씨체、탄화물분포균균적금상조직,이제고개판침포적내마성,재금륜공사현행화염쉬화배치기출상,침대쌍철면조선경화쌍철면세선경량충불동강사선규호적개판침포,통과우화양기류량、액화기류량화개판침포수송속도,우화화염쉬화공예.공예우화시험결과표명,쌍철면조선경개판침포적최가쉬화공예위:양기류량(83±2)mL/s,액화기류량(70±1)mL/s,침포수송속도(4.5±0.5)m/min;쌍철면세선경개판침포최가쉬화공예위:양기류량(79±3)mL/s,액화기류량(71±2)mL/s,침포수송속도(5.5±0.5)m/min.