热固性树脂
熱固性樹脂
열고성수지
THERMOSETTING RESIN
2008年
6期
5-8
,共4页
纳米碳纤维%碳纳米管%碳,酚醛树脂基复合材料%改性
納米碳纖維%碳納米管%碳,酚醛樹脂基複閤材料%改性
납미탄섬유%탄납미관%탄,분철수지기복합재료%개성
针对碳,酚醛树脂基复合材料层间剪切强度低的缺点,采用纳米填料进行改性.测试了2种纳米填料(纳米碳纤维、碳纳米管)改性后酚醛树脂的热解性能,研究了纳米填料对复合材料力学性能、烧蚀性能以及高温炭化后力学性能的影响,并观察分析了复合材料测试后的微观形貌.研究结果表明,纳米填料改性后,复合材料的力学性能、烧蚀性能均有所改善.其中,纳米碳纤维改性后复合材料的常温层间剪切强度达到2,4.9 MPa,氧乙炔线烧蚀率为22.75 μm/s,质量烧蚀率为23.58 mg/s.纳米碳纤维表面粗糙,与树脂基体的界面强度高,因此其改性后的力学性能和烧蚀性能优于碳纳米管.
針對碳,酚醛樹脂基複閤材料層間剪切彊度低的缺點,採用納米填料進行改性.測試瞭2種納米填料(納米碳纖維、碳納米管)改性後酚醛樹脂的熱解性能,研究瞭納米填料對複閤材料力學性能、燒蝕性能以及高溫炭化後力學性能的影響,併觀察分析瞭複閤材料測試後的微觀形貌.研究結果錶明,納米填料改性後,複閤材料的力學性能、燒蝕性能均有所改善.其中,納米碳纖維改性後複閤材料的常溫層間剪切彊度達到2,4.9 MPa,氧乙炔線燒蝕率為22.75 μm/s,質量燒蝕率為23.58 mg/s.納米碳纖維錶麵粗糙,與樹脂基體的界麵彊度高,因此其改性後的力學性能和燒蝕性能優于碳納米管.
침대탄,분철수지기복합재료층간전절강도저적결점,채용납미전료진행개성.측시료2충납미전료(납미탄섬유、탄납미관)개성후분철수지적열해성능,연구료납미전료대복합재료역학성능、소식성능이급고온탄화후역학성능적영향,병관찰분석료복합재료측시후적미관형모.연구결과표명,납미전료개성후,복합재료적역학성능、소식성능균유소개선.기중,납미탄섬유개성후복합재료적상온층간전절강도체도2,4.9 MPa,양을결선소식솔위22.75 μm/s,질량소식솔위23.58 mg/s.납미탄섬유표면조조,여수지기체적계면강도고,인차기개성후적역학성능화소식성능우우탄납미관.