北京联合大学学报:自然科学版
北京聯閤大學學報:自然科學版
북경연합대학학보:자연과학판
Journal of Beijing Union University
2011年
3期
74-76
,共3页
罐容表%变位参数%误差率%积分%标定值
罐容錶%變位參數%誤差率%積分%標定值
관용표%변위삼수%오차솔%적분%표정치
storage tank meter%the mode parameters%Linear fit%error rate%integral%calibration value
建立罐体变位后罐内储油量与油位高度及变位参数(纵向倾斜角度α和横向偏转角度β)之间的一般关系,并通过罐体变位后在进出油过程中的实际检测数据,确定变位参数。然后利用关系得出罐体变位后油位高度对应的储油量。
建立罐體變位後罐內儲油量與油位高度及變位參數(縱嚮傾斜角度α和橫嚮偏轉角度β)之間的一般關繫,併通過罐體變位後在進齣油過程中的實際檢測數據,確定變位參數。然後利用關繫得齣罐體變位後油位高度對應的儲油量。
건립관체변위후관내저유량여유위고도급변위삼수(종향경사각도α화횡향편전각도β)지간적일반관계,병통과관체변위후재진출유과정중적실제검측수거,학정변위삼수。연후이용관계득출관체변위후유위고도대응적저유량。
The calculus and mat lab is used to set up the general relation among expansion tank capacity,the oil level and the mode parameters(vertical inclination angle and transversal inclination angle),and the mode parameters by actual detective data in the process of oil entering and being get out after the oil tank deflection is determined.The corresponding storage tank weight of the oil level is figured out by the relation.