材料导报
材料導報
재료도보
MATERIALS REVIEW
2012年
6期
76-80
,共5页
肖正涛%李相波%王佳%黄国胜%周雄
肖正濤%李相波%王佳%黃國勝%週雄
초정도%리상파%왕가%황국성%주웅
摩擦磨损%Cu-20%Al2O3%冷喷涂%热处理
摩抆磨損%Cu-20%Al2O3%冷噴塗%熱處理
마찰마손%Cu-20%Al2O3%랭분도%열처리
利用冷喷涂技术制备Cu-20%(质量分数)Al2O3复合涂层,并在氢气保护气氛下对该复合涂层进行300℃、500℃和700℃退火热处理.采用常温干摩擦试验评价热处理对冷喷涂Cu-20%(质量分数)Al2O复合涂层耐磨损性能的影响,并利用扫描电镜(SEM)观察涂层表面磨痕形貌.结果表明,复合涂层经退火热处理后发生了再结晶现象,涂层显微硬度降低.冷喷涂态和退火态复合涂层磨损机制不同:冷喷涂态复合涂层和低温退火热处理(300℃和500℃)下复合涂层磨损主要为磨粒磨损,700℃退火态复合涂层主要表现为疲劳磨损.
利用冷噴塗技術製備Cu-20%(質量分數)Al2O3複閤塗層,併在氫氣保護氣氛下對該複閤塗層進行300℃、500℃和700℃退火熱處理.採用常溫榦摩抆試驗評價熱處理對冷噴塗Cu-20%(質量分數)Al2O複閤塗層耐磨損性能的影響,併利用掃描電鏡(SEM)觀察塗層錶麵磨痕形貌.結果錶明,複閤塗層經退火熱處理後髮生瞭再結晶現象,塗層顯微硬度降低.冷噴塗態和退火態複閤塗層磨損機製不同:冷噴塗態複閤塗層和低溫退火熱處理(300℃和500℃)下複閤塗層磨損主要為磨粒磨損,700℃退火態複閤塗層主要錶現為疲勞磨損.
이용랭분도기술제비Cu-20%(질량분수)Al2O3복합도층,병재경기보호기분하대해복합도층진행300℃、500℃화700℃퇴화열처리.채용상온간마찰시험평개열처리대랭분도Cu-20%(질량분수)Al2O복합도층내마손성능적영향,병이용소묘전경(SEM)관찰도층표면마흔형모.결과표명,복합도층경퇴화열처리후발생료재결정현상,도층현미경도강저.랭분도태화퇴화태복합도층마손궤제불동:랭분도태복합도층화저온퇴화열처리(300℃화500℃)하복합도층마손주요위마립마손,700℃퇴화태복합도층주요표현위피로마손.