塑料
塑料
소료
PLASTICS
2012年
2期
112-114,63
,共4页
全电动注塑机%伺服电机及驱动%滚珠丝杠%控制系统%重复精度
全電動註塑機%伺服電機及驅動%滾珠絲槓%控製繫統%重複精度
전전동주소궤%사복전궤급구동%곤주사강%공제계통%중복정도
研制出适用于全电动注塑机的大功率伺服电机及驱动、短行程大负载滚珠丝杠和控制系统等核心功能部件,并成功开发出精密级的全电动注塑机.所研制的全电动注塑机的关键性能参数经测试表明:注射终止位置重复精度达到0.02 mm、锁模力重复精度达到0.136%、制品质量重复精度达到0.08%,完全满足精密注塑成型机的要求.
研製齣適用于全電動註塑機的大功率伺服電機及驅動、短行程大負載滾珠絲槓和控製繫統等覈心功能部件,併成功開髮齣精密級的全電動註塑機.所研製的全電動註塑機的關鍵性能參數經測試錶明:註射終止位置重複精度達到0.02 mm、鎖模力重複精度達到0.136%、製品質量重複精度達到0.08%,完全滿足精密註塑成型機的要求.
연제출괄용우전전동주소궤적대공솔사복전궤급구동、단행정대부재곤주사강화공제계통등핵심공능부건,병성공개발출정밀급적전전동주소궤.소연제적전전동주소궤적관건성능삼수경측시표명:주사종지위치중복정도체도0.02 mm、쇄모력중복정도체도0.136%、제품질량중복정도체도0.08%,완전만족정밀주소성형궤적요구.