西安建筑科技大学学报(自然科学版)
西安建築科技大學學報(自然科學版)
서안건축과기대학학보(자연과학판)
JOURNAL OF XI'AN UNIVERSITY OF ARCHITECTURE & TECHNOLOGY
2009年
6期
764-770
,共7页
张洪亮%郭忠印%梁伟%高启聚%丛林
張洪亮%郭忠印%樑偉%高啟聚%叢林
장홍량%곽충인%량위%고계취%총림
路基工程%粘土%永久变形%预估模型%重复加载试验%数值仿真
路基工程%粘土%永久變形%預估模型%重複加載試驗%數值倣真
로기공정%점토%영구변형%예고모형%중복가재시험%수치방진
subgrade engineering%clay%permanent deformation%prediction model%repeated loads test%numerical simulation
路基永久变形影响沥青路面的车辙,经详细分析推荐出路基土永久变形试验方案,对粘土进行了重复加载动三轴试验,建立了塑性应变和荷载作用次数之间的关系式,使用最小二乘法拟合出该式中的系数与含水量和回弹模量之间的回归公式.采用扩展的Drunker-prager土体本构模型,对于粘土重复加载动三轴试验进行了有限元仿真.试验曲线或有限元仿真曲线与预估模型均比较吻合,相关系数R~2均在0.99以上;模型参数的回归公式的相关系数R~2最小值为0.53,大于临界值0.50.分析结果表明:建立的粘土永久变形预估模型可靠性较高,可以用有限元仿真来代替部分室内重复加载动三轴试验.
路基永久變形影響瀝青路麵的車轍,經詳細分析推薦齣路基土永久變形試驗方案,對粘土進行瞭重複加載動三軸試驗,建立瞭塑性應變和荷載作用次數之間的關繫式,使用最小二乘法擬閤齣該式中的繫數與含水量和迴彈模量之間的迴歸公式.採用擴展的Drunker-prager土體本構模型,對于粘土重複加載動三軸試驗進行瞭有限元倣真.試驗麯線或有限元倣真麯線與預估模型均比較吻閤,相關繫數R~2均在0.99以上;模型參數的迴歸公式的相關繫數R~2最小值為0.53,大于臨界值0.50.分析結果錶明:建立的粘土永久變形預估模型可靠性較高,可以用有限元倣真來代替部分室內重複加載動三軸試驗.
로기영구변형영향력청로면적차철,경상세분석추천출로기토영구변형시험방안,대점토진행료중복가재동삼축시험,건립료소성응변화하재작용차수지간적관계식,사용최소이승법의합출해식중적계수여함수량화회탄모량지간적회귀공식.채용확전적Drunker-prager토체본구모형,대우점토중복가재동삼축시험진행료유한원방진.시험곡선혹유한원방진곡선여예고모형균비교문합,상관계수R~2균재0.99이상;모형삼수적회귀공식적상관계수R~2최소치위0.53,대우림계치0.50.분석결과표명:건립적점토영구변형예고모형가고성교고,가이용유한원방진래대체부분실내중복가재동삼축시험.
The permanent deformation of subgrade has effects on the rutting of asphalt pavement. The program of permanent deformation tests of subgrade soils was established through analysis in detail. Repeated loads tests were conducted with clay. The basic relationship between the permanent strain and the number of load applications was found, and the regression formula between the coefficients in the models and a moisture content and a resilient modulus were found with the least square method. At last, extended Drunker-Prager model was used to clay and the repeated load triaxial tests were simulated by the finite element method. The square of the correlative coefficient between the calculated curve and measured or numerical simulated one was as great as 0.99. The minimum square of the correlative coefficient of the regression formula of the coefficients in the models was 0.53 which was greater than the critical value of 0.50. Results show that the permanent deformation prediction model for a clay founded have high reliability, and some repeated load triaxial tests can be replaced by finite element simulations.