计量与测试技术
計量與測試技術
계량여측시기술
METROLOGY & MEASUREMENT TECHNIQUE
2011年
12期
20,23
,共2页
透射密度计%校准%结果差异
透射密度計%校準%結果差異
투사밀도계%교준%결과차이
透射式黑白密度计,广泛应用于印刷制版、劳动保护、电影胶片洗印、感光胶片、医疗卫生等行业.故密度计测量结果的准确性直接影响到产品质量、结果分析等.为保证透射式黑白密度计测量结果的准确,对密度计的校准(检测)是很重要的.对仪器的校准中,有时用仪器自带的密度片校准与用标准密度片校准,出现不一致的结果(即使用单位自校的结果与校准单位的校准结果不同);另外,根据目前采用的中级密度值校准方法,对大多数仪器是没有问题的.但有的仪器,0级校准和中级校准结果是不同的,甚至有的仪器,校准密度值以下密度值(例如,2.0校准,小于2.0的密度值)无法测出.所以,根据仪器实际情况,制定校准方法,合理判定仪器,才能保证仪器测量结果的准确.
透射式黑白密度計,廣汎應用于印刷製版、勞動保護、電影膠片洗印、感光膠片、醫療衛生等行業.故密度計測量結果的準確性直接影響到產品質量、結果分析等.為保證透射式黑白密度計測量結果的準確,對密度計的校準(檢測)是很重要的.對儀器的校準中,有時用儀器自帶的密度片校準與用標準密度片校準,齣現不一緻的結果(即使用單位自校的結果與校準單位的校準結果不同);另外,根據目前採用的中級密度值校準方法,對大多數儀器是沒有問題的.但有的儀器,0級校準和中級校準結果是不同的,甚至有的儀器,校準密度值以下密度值(例如,2.0校準,小于2.0的密度值)無法測齣.所以,根據儀器實際情況,製定校準方法,閤理判定儀器,纔能保證儀器測量結果的準確.
투사식흑백밀도계,엄범응용우인쇄제판、노동보호、전영효편세인、감광효편、의료위생등행업.고밀도계측량결과적준학성직접영향도산품질량、결과분석등.위보증투사식흑백밀도계측량결과적준학,대밀도계적교준(검측)시흔중요적.대의기적교준중,유시용의기자대적밀도편교준여용표준밀도편교준,출현불일치적결과(즉사용단위자교적결과여교준단위적교준결과불동);령외,근거목전채용적중급밀도치교준방법,대대다수의기시몰유문제적.단유적의기,0급교준화중급교준결과시불동적,심지유적의기,교준밀도치이하밀도치(례여,2.0교준,소우2.0적밀도치)무법측출.소이,근거의기실제정황,제정교준방법,합리판정의기,재능보증의기측량결과적준학.