热加工工艺
熱加工工藝
열가공공예
HOT WORKING TECHNOLOGY
2012年
6期
44-47
,共4页
冯佃臣%杨亮%李涛%高占勇
馮佃臣%楊亮%李濤%高佔勇
풍전신%양량%리도%고점용
高温合金%时效%组织和性能%高温氧化
高溫閤金%時效%組織和性能%高溫氧化
고온합금%시효%조직화성능%고온양화
以高温合金Cr28Ni48为基础,通过添加铌和钇减少Ni元素的含量,以提高高温力学性能和降低成本.研究了时效温度、时效时间对含Nb、Y高温合金组织与性能的影响.将经1100℃固溶处理后的合金,分别在820、900、980℃时效处理24、48、72h.对基体上析出的第二相利用扫描电镜进行金相组织观察和成分分析.结果表明:该高温合金在900℃时效48 h为最佳热处理工艺.
以高溫閤金Cr28Ni48為基礎,通過添加鈮和釔減少Ni元素的含量,以提高高溫力學性能和降低成本.研究瞭時效溫度、時效時間對含Nb、Y高溫閤金組織與性能的影響.將經1100℃固溶處理後的閤金,分彆在820、900、980℃時效處理24、48、72h.對基體上析齣的第二相利用掃描電鏡進行金相組織觀察和成分分析.結果錶明:該高溫閤金在900℃時效48 h為最佳熱處理工藝.
이고온합금Cr28Ni48위기출,통과첨가니화을감소Ni원소적함량,이제고고온역학성능화강저성본.연구료시효온도、시효시간대함Nb、Y고온합금조직여성능적영향.장경1100℃고용처리후적합금,분별재820、900、980℃시효처리24、48、72h.대기체상석출적제이상이용소묘전경진행금상조직관찰화성분분석.결과표명:해고온합금재900℃시효48 h위최가열처리공예.