口腔颌面修复学杂志
口腔頜麵脩複學雜誌
구강합면수복학잡지
CHINESE JOURNAL OF PROSTHODONTICS MARCH
2004年
2期
88-91
,共4页
郭宏%刘洪臣%张润荃%高勇%王延荣
郭宏%劉洪臣%張潤荃%高勇%王延榮
곽굉%류홍신%장윤전%고용%왕연영
牙齿磨耗%颞下颌关节%有限元法%应力分析
牙齒磨耗%顳下頜關節%有限元法%應力分析
아치마모%섭하합관절%유한원법%응력분석
目的:计算机模拟牙齿不同程度磨耗、颌垂直距离减小时,三维有限元分析颞下颌关节内的应力分布变化.方法:应用以往研究所建正常颞下颌关节三维有限元模型,分别将下牙列分层删除从上至下1/3、1/2及全部的单元,并改变咀嚼肌加力方向.应用ANSYS6.1分析颞下颌关节内的应力变化.结果:随着磨耗程度的加重,髁状突表面的应力增加较多.关节盘等效应力增加的速度较髁状突、关节窝要大;关节盘的后带后缘,还有关节盘中带、后带的中间、外侧区有应力集中表现;磨耗越重,变形越大,关节盘越薄.颞骨关节窝不但应力值增加,最大应力的位置也由关节结节后斜面向顶部移动.结论:牙齿磨耗可造成颞下颌关节应力的明显增加及特定的应力集中区.
目的:計算機模擬牙齒不同程度磨耗、頜垂直距離減小時,三維有限元分析顳下頜關節內的應力分佈變化.方法:應用以往研究所建正常顳下頜關節三維有限元模型,分彆將下牙列分層刪除從上至下1/3、1/2及全部的單元,併改變咀嚼肌加力方嚮.應用ANSYS6.1分析顳下頜關節內的應力變化.結果:隨著磨耗程度的加重,髁狀突錶麵的應力增加較多.關節盤等效應力增加的速度較髁狀突、關節窩要大;關節盤的後帶後緣,還有關節盤中帶、後帶的中間、外側區有應力集中錶現;磨耗越重,變形越大,關節盤越薄.顳骨關節窩不但應力值增加,最大應力的位置也由關節結節後斜麵嚮頂部移動.結論:牙齒磨耗可造成顳下頜關節應力的明顯增加及特定的應力集中區.
목적:계산궤모의아치불동정도마모、합수직거리감소시,삼유유한원분석섭하합관절내적응력분포변화.방법:응용이왕연구소건정상섭하합관절삼유유한원모형,분별장하아렬분층산제종상지하1/3、1/2급전부적단원,병개변저작기가력방향.응용ANSYS6.1분석섭하합관절내적응력변화.결과:수착마모정도적가중,과상돌표면적응력증가교다.관절반등효응력증가적속도교과상돌、관절와요대;관절반적후대후연,환유관절반중대、후대적중간、외측구유응력집중표현;마모월중,변형월대,관절반월박.섭골관절와불단응력치증가,최대응력적위치야유관절결절후사면향정부이동.결론:아치마모가조성섭하합관절응력적명현증가급특정적응력집중구.