农业工程学报
農業工程學報
농업공정학보
2009年
11期
146-151,封4
,共7页
王春林%刘红光%司艳雷%吴志旺%易同祥
王春林%劉紅光%司豔雷%吳誌旺%易同祥
왕춘림%류홍광%사염뢰%오지왕%역동상
旋流%泵%优化%设计%大涡模拟
鏇流%泵%優化%設計%大渦模擬
선류%빙%우화%설계%대와모의
rotational flow%pumps%optimization%design%large eddy model simulation (LES)
采用CFD软件通过大涡模拟,基于正交设计法对旋流自吸泵泵体进行了优化设计,研究了泵体各几何参数对旋流自吸泵性能的影响.设计了一个4因素3水平的正交方案,对数值计算的数据作了极差分析,得到了各几何参数对设计点扬程、效率,最优点的扬程、效率及最大自吸高度5个性能指标的影响的主次顺序.对于数据处理结果,通过综合平衡法分析得出了最优的参数组合.并对得到的最优参数组合进行性能试验,验证了理论计算的可靠性.计算及分析结果对旋流自吸泵性能优化设计具有一定的参考价值.
採用CFD軟件通過大渦模擬,基于正交設計法對鏇流自吸泵泵體進行瞭優化設計,研究瞭泵體各幾何參數對鏇流自吸泵性能的影響.設計瞭一箇4因素3水平的正交方案,對數值計算的數據作瞭極差分析,得到瞭各幾何參數對設計點颺程、效率,最優點的颺程、效率及最大自吸高度5箇性能指標的影響的主次順序.對于數據處理結果,通過綜閤平衡法分析得齣瞭最優的參數組閤.併對得到的最優參數組閤進行性能試驗,驗證瞭理論計算的可靠性.計算及分析結果對鏇流自吸泵性能優化設計具有一定的參攷價值.
채용CFD연건통과대와모의,기우정교설계법대선류자흡빙빙체진행료우화설계,연구료빙체각궤하삼수대선류자흡빙성능적영향.설계료일개4인소3수평적정교방안,대수치계산적수거작료겁차분석,득도료각궤하삼수대설계점양정、효솔,최우점적양정、효솔급최대자흡고도5개성능지표적영향적주차순서.대우수거처리결과,통과종합평형법분석득출료최우적삼수조합.병대득도적최우삼수조합진행성능시험,험증료이론계산적가고성.계산급분석결과대선류자흡빙성능우화설계구유일정적삼고개치.
Based on orthogonal design, optimization design of rotational flow self-priming pump was done through large eddy model simulation (LES) by using CFD software, and the influence of pump body geometrical parameters on its performance was studied. Orthogonal scheme of four factors and three levels was designed, and the influence orders of geometrical parameters on head and efficiency at design point, head and efficiency at the best efficiency point, and maximum self-suction height were gotten by using range analysis of the calculated data. The optimal parameter combination was received by comprehensive balance analysis of the disposed data result. And performance test of optimal parameter combination was accomplished, and the reliability of theoretical calculation was proved. The calculation and analysis results were instructive to the optimization design of rotational flow self-priming pump.