北京理工大学学报
北京理工大學學報
북경리공대학학보
JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY
2011年
2期
225-229
,共5页
文波%马壮%王富耻%柳彦博%王全胜
文波%馬壯%王富恥%柳彥博%王全勝
문파%마장%왕부치%류언박%왕전성
等离子喷涂%TiC涂层%耐烧蚀%致密化
等離子噴塗%TiC塗層%耐燒蝕%緻密化
등리자분도%TiC도층%내소식%치밀화
采用等离子喷涂方法在石墨基体上制备出较为致密的Mo黏结层和TiC耐烧蚀涂层,利用SEM,XRD表征氧乙炔烧蚀试验前后涂层的表面形貌与相结构.结果表明:随着烧蚀距离减小,涂层质量烧蚀率呈现先增加后减小的趋势,最终趋于稳定;随着烧蚀时间增大,致密化区域快速增大,涂层质量烧蚀率略有增加.烧蚀过程中涂层经历了点状熔融、线形连接、网状连接和完全致密4个过程.TiC涂层在高温燃流作用下氧化生成TiO2并熔融,在燃流冲刷和表面张力作用下发生黏性流动,形成TiO2致密层,从而减小了机械剥落,降低了涂层质量烧蚀率.
採用等離子噴塗方法在石墨基體上製備齣較為緻密的Mo黏結層和TiC耐燒蝕塗層,利用SEM,XRD錶徵氧乙炔燒蝕試驗前後塗層的錶麵形貌與相結構.結果錶明:隨著燒蝕距離減小,塗層質量燒蝕率呈現先增加後減小的趨勢,最終趨于穩定;隨著燒蝕時間增大,緻密化區域快速增大,塗層質量燒蝕率略有增加.燒蝕過程中塗層經歷瞭點狀鎔融、線形連接、網狀連接和完全緻密4箇過程.TiC塗層在高溫燃流作用下氧化生成TiO2併鎔融,在燃流遲刷和錶麵張力作用下髮生黏性流動,形成TiO2緻密層,從而減小瞭機械剝落,降低瞭塗層質量燒蝕率.
채용등리자분도방법재석묵기체상제비출교위치밀적Mo점결층화TiC내소식도층,이용SEM,XRD표정양을결소식시험전후도층적표면형모여상결구.결과표명:수착소식거리감소,도층질량소식솔정현선증가후감소적추세,최종추우은정;수착소식시간증대,치밀화구역쾌속증대,도층질량소식솔략유증가.소식과정중도층경력료점상용융、선형련접、망상련접화완전치밀4개과정.TiC도층재고온연류작용하양화생성TiO2병용융,재연류충쇄화표면장력작용하발생점성류동,형성TiO2치밀층,종이감소료궤계박락,강저료도층질량소식솔.