热加工工艺
熱加工工藝
열가공공예
HOT WORKING TECHNOLOGY
2012年
8期
184-185,188
,共3页
季方方%卢锦德%张仁国%邱少林
季方方%盧錦德%張仁國%邱少林
계방방%로금덕%장인국%구소림
真空固溶%高强铝合金%组织%性能
真空固溶%高彊鋁閤金%組織%性能
진공고용%고강려합금%조직%성능
通过研究真空固溶对新型高强铝合金组织和性能的影响,探讨了新型铝合金固溶过程中过烧对其组织及性能影响的机理.结果表明:相同时效机制下,真空560℃高温固溶时,抗拉强度为452 MPa,塑性9.5%;而普通560℃高温固溶时抗拉强度为320 MPa,塑性1.3%.
通過研究真空固溶對新型高彊鋁閤金組織和性能的影響,探討瞭新型鋁閤金固溶過程中過燒對其組織及性能影響的機理.結果錶明:相同時效機製下,真空560℃高溫固溶時,抗拉彊度為452 MPa,塑性9.5%;而普通560℃高溫固溶時抗拉彊度為320 MPa,塑性1.3%.
통과연구진공고용대신형고강려합금조직화성능적영향,탐토료신형려합금고용과정중과소대기조직급성능영향적궤리.결과표명:상동시효궤제하,진공560℃고온고용시,항랍강도위452 MPa,소성9.5%;이보통560℃고온고용시항랍강도위320 MPa,소성1.3%.