高电压技术
高電壓技術
고전압기술
HIGH VOLTAGE ENGINEERING
2011年
7期
1695-1699
,共5页
周湶%卢毅%李剑%安文斗%张冠军
週湶%盧毅%李劍%安文鬥%張冠軍
주천%로의%리검%안문두%장관군
行波%故障测距%色散特性%小波包%相关分析%频带
行波%故障測距%色散特性%小波包%相關分析%頻帶
행파%고장측거%색산특성%소파포%상관분석%빈대
traveling wave%fault location%dispersion characteristics%wavelet packets%correlation analysis%frequency band
由于故障行波传播色散的影响,确定行波到达时刻和选择行波波速一直是电缆行波测距的难题。针对以上两个问题,提出了基于小渡苞提取算法和相关分析的电缆双端行波故障测距方法。该方法将暂态行波信号通过小波包分解为不同的频带,然后提取能量相对集中的频带进行小波包重构。在该频带,线路的衰减系数和波速都可近似为常数,因此电缆两端的重构波形相似。用相关分析方法确定两端波形时间差,再结合该频带的波速,即能精确确定故障位置。通过对实验结果的分析表明,提出的方法提高了测距精度,是有效的。
由于故障行波傳播色散的影響,確定行波到達時刻和選擇行波波速一直是電纜行波測距的難題。針對以上兩箇問題,提齣瞭基于小渡苞提取算法和相關分析的電纜雙耑行波故障測距方法。該方法將暫態行波信號通過小波包分解為不同的頻帶,然後提取能量相對集中的頻帶進行小波包重構。在該頻帶,線路的衰減繫數和波速都可近似為常數,因此電纜兩耑的重構波形相似。用相關分析方法確定兩耑波形時間差,再結閤該頻帶的波速,即能精確確定故障位置。通過對實驗結果的分析錶明,提齣的方法提高瞭測距精度,是有效的。
유우고장행파전파색산적영향,학정행파도체시각화선택행파파속일직시전람행파측거적난제。침대이상량개문제,제출료기우소도포제취산법화상관분석적전람쌍단행파고장측거방법。해방법장잠태행파신호통과소파포분해위불동적빈대,연후제취능량상대집중적빈대진행소파포중구。재해빈대,선로적쇠감계수화파속도가근사위상수,인차전람량단적중구파형상사。용상관분석방법학정량단파형시간차,재결합해빈대적파속,즉능정학학정고장위치。통과대실험결과적분석표명,제출적방법제고료측거정도,시유효적。
Because of the influence of the transmission dispersion characteristics of faults generated traveling wave, the detection of traveling wave arriving time and the selection of traveling wave velocity are two difficulties in traveling wave fault location of cable. We put forward a new fault location method on the basis of the wavelet packets extraction algorithm and correlation analysis algorithm. By utilizing the theory of wavelet packet decomposition, transient traveling wave is decomposed into different frequency sections, and the frequency band signal with concentrated energy is extracted for wavelet packet reconstruction. The attenuation coefficient and wave velocity of this frequency band are regarded as constants, so the reconstructed waveforms at both terminals are similar. The correlation is analyzed to calculate the time difference, and the accurate fault location can be figured out combined with the constant velocity of this frequency band. The experimental results verify both the validity and the high precision of this algorithm.