耐火材料
耐火材料
내화재료
REFRACTORIES
2007年
4期
241-244
,共4页
聂建华%李亚伟%甘明亮%李远兵%颜浩
聶建華%李亞偉%甘明亮%李遠兵%顏浩
섭건화%리아위%감명량%리원병%안호
铝热还原%氮化钛%复合材料%显微结构
鋁熱還原%氮化鈦%複閤材料%顯微結構
려열환원%담화태%복합재료%현미결구
以金属铝粉和钛白粉为原料,在匣钵中埋炭保护气氛下采用铝热还原氮化法制备了TiN-Al2O3复合材料.采用XRD、SEM和TEM等分析手段,研究了铝热还原氮化法制备TiN-Al2O3复合材料在不同热处理条件下(分别为1 300 ℃ 3 h、1 400 ℃ 3 h和1 500 ℃ 3 h)的物相组成、晶格常数、显微结构.研究结果表明:在埋炭气氛下采用铝热还原氮化法可以制备TiN-Al2O3复合材料;处理温度明显影响着铝热反应的程度及产物的形貌,随着处理温度的上升,处理后的产物中TiN含量逐渐增加,晶粒逐渐长大,晶格常数逐渐接近理论值.热力学计算发现,埋炭条件下,在较低的处理温度下,铝除参与铝热还原反应外,还与炭粉床中氧发生反应,导致参与铝热反应的金属铝不足,造成产物中有剩余的金红石存在.
以金屬鋁粉和鈦白粉為原料,在匣缽中埋炭保護氣氛下採用鋁熱還原氮化法製備瞭TiN-Al2O3複閤材料.採用XRD、SEM和TEM等分析手段,研究瞭鋁熱還原氮化法製備TiN-Al2O3複閤材料在不同熱處理條件下(分彆為1 300 ℃ 3 h、1 400 ℃ 3 h和1 500 ℃ 3 h)的物相組成、晶格常數、顯微結構.研究結果錶明:在埋炭氣氛下採用鋁熱還原氮化法可以製備TiN-Al2O3複閤材料;處理溫度明顯影響著鋁熱反應的程度及產物的形貌,隨著處理溫度的上升,處理後的產物中TiN含量逐漸增加,晶粒逐漸長大,晶格常數逐漸接近理論值.熱力學計算髮現,埋炭條件下,在較低的處理溫度下,鋁除參與鋁熱還原反應外,還與炭粉床中氧髮生反應,導緻參與鋁熱反應的金屬鋁不足,造成產物中有剩餘的金紅石存在.
이금속려분화태백분위원료,재갑발중매탄보호기분하채용려열환원담화법제비료TiN-Al2O3복합재료.채용XRD、SEM화TEM등분석수단,연구료려열환원담화법제비TiN-Al2O3복합재료재불동열처리조건하(분별위1 300 ℃ 3 h、1 400 ℃ 3 h화1 500 ℃ 3 h)적물상조성、정격상수、현미결구.연구결과표명:재매탄기분하채용려열환원담화법가이제비TiN-Al2O3복합재료;처리온도명현영향착려열반응적정도급산물적형모,수착처리온도적상승,처리후적산물중TiN함량축점증가,정립축점장대,정격상수축점접근이론치.열역학계산발현,매탄조건하,재교저적처리온도하,려제삼여려열환원반응외,환여탄분상중양발생반응,도치삼여려열반응적금속려불족,조성산물중유잉여적금홍석존재.