应用化工
應用化工
응용화공
APPLIED CHEMICAL INDUSTRY
2009年
4期
504-508
,共5页
罗雪方%赵秀丽%白战争%杜亮%黄奕刚%王建华
囉雪方%趙秀麗%白戰爭%杜亮%黃奕剛%王建華
라설방%조수려%백전쟁%두량%황혁강%왕건화
聚氨酯丙烯酸酯乳液%季戊四醇三丙烯酸酯%丙三醇%光固化%多官能度
聚氨酯丙烯痠酯乳液%季戊四醇三丙烯痠酯%丙三醇%光固化%多官能度
취안지병희산지유액%계무사순삼병희산지%병삼순%광고화%다관능도
用异佛尔酮二异氰酸酯(IPDI)、丙三醇、聚四氢呋喃醚二醇(PTMG)、甲基丙烯酸羟乙酯(DMPA)、季戊四醇三丙烯酸酯(PETA)等原料合成了具有高交联度的多官能度紫外光固化聚氨酯丙烯酸酯(PUA)水乳液.采用国标GB12009.4-89,FT-IR,13C NMR,DMA,AFM等方法对PUA预聚体合成过程和聚合物乳液(涂膜)进行了测试和表征,考察了n(IPDI)∶n(HO-OH)∶n(丙三醇)、DMPA质量分数、pH值等对乳液及涂膜性能的影响.结果表明,随着丙三醇质量分数增大,PUA光固化速率、耐溶剂性、膜硬度提高、吸水率降低;随着DMPA质量分数的增加,PUA涂膜硬度、吸水率增强,乳胶粒径越来越小;随着中和度增大,乳液逐渐由云雾状趋向透明,粘度下降.当n(IPDI) ∶n(HO-OH)∶n(丙三醇)=9∶6∶1,w(丙三醇)=2%左右,DMPA质量分数为4.6%,中和度为90%时,乳液储存稳定(30 d),涂膜光固化速率达到7 s,附着力为1,硬度为3 H,耐水性、耐化学品性更佳.
用異彿爾酮二異氰痠酯(IPDI)、丙三醇、聚四氫呋喃醚二醇(PTMG)、甲基丙烯痠羥乙酯(DMPA)、季戊四醇三丙烯痠酯(PETA)等原料閤成瞭具有高交聯度的多官能度紫外光固化聚氨酯丙烯痠酯(PUA)水乳液.採用國標GB12009.4-89,FT-IR,13C NMR,DMA,AFM等方法對PUA預聚體閤成過程和聚閤物乳液(塗膜)進行瞭測試和錶徵,攷察瞭n(IPDI)∶n(HO-OH)∶n(丙三醇)、DMPA質量分數、pH值等對乳液及塗膜性能的影響.結果錶明,隨著丙三醇質量分數增大,PUA光固化速率、耐溶劑性、膜硬度提高、吸水率降低;隨著DMPA質量分數的增加,PUA塗膜硬度、吸水率增彊,乳膠粒徑越來越小;隨著中和度增大,乳液逐漸由雲霧狀趨嚮透明,粘度下降.噹n(IPDI) ∶n(HO-OH)∶n(丙三醇)=9∶6∶1,w(丙三醇)=2%左右,DMPA質量分數為4.6%,中和度為90%時,乳液儲存穩定(30 d),塗膜光固化速率達到7 s,附著力為1,硬度為3 H,耐水性、耐化學品性更佳.
용이불이동이이청산지(IPDI)、병삼순、취사경부남미이순(PTMG)、갑기병희산간을지(DMPA)、계무사순삼병희산지(PETA)등원료합성료구유고교련도적다관능도자외광고화취안지병희산지(PUA)수유액.채용국표GB12009.4-89,FT-IR,13C NMR,DMA,AFM등방법대PUA예취체합성과정화취합물유액(도막)진행료측시화표정,고찰료n(IPDI)∶n(HO-OH)∶n(병삼순)、DMPA질량분수、pH치등대유액급도막성능적영향.결과표명,수착병삼순질량분수증대,PUA광고화속솔、내용제성、막경도제고、흡수솔강저;수착DMPA질량분수적증가,PUA도막경도、흡수솔증강,유효립경월래월소;수착중화도증대,유액축점유운무상추향투명,점도하강.당n(IPDI) ∶n(HO-OH)∶n(병삼순)=9∶6∶1,w(병삼순)=2%좌우,DMPA질량분수위4.6%,중화도위90%시,유액저존은정(30 d),도막광고화속솔체도7 s,부착력위1,경도위3 H,내수성、내화학품성경가.