铸造技术
鑄造技術
주조기술
FOUNDRY TECHNOLOGY
2005年
6期
519-522
,共4页
镁合金%石膏型熔模铸造%真空浇注%压力凝固
鎂閤金%石膏型鎔模鑄造%真空澆註%壓力凝固
미합금%석고형용모주조%진공요주%압력응고
研究真空浇注条件下镁合金石膏型压力凝固过程中浇注温度、真空度对镁合金流动性的影响及凝固压力、操作时间与镁合金拉伸性能的关系.结果表明,高真空度和高浇注温度条件下,可使镁合金液在石膏型中获得很好的充型.铸件凝固过程中,凝固压力越高,操作时间愈短,得到的铸件组织越致密,拉伸性能愈高.
研究真空澆註條件下鎂閤金石膏型壓力凝固過程中澆註溫度、真空度對鎂閤金流動性的影響及凝固壓力、操作時間與鎂閤金拉伸性能的關繫.結果錶明,高真空度和高澆註溫度條件下,可使鎂閤金液在石膏型中穫得很好的充型.鑄件凝固過程中,凝固壓力越高,操作時間愈短,得到的鑄件組織越緻密,拉伸性能愈高.
연구진공요주조건하미합금석고형압력응고과정중요주온도、진공도대미합금류동성적영향급응고압력、조작시간여미합금랍신성능적관계.결과표명,고진공도화고요주온도조건하,가사미합금액재석고형중획득흔호적충형.주건응고과정중,응고압력월고,조작시간유단,득도적주건조직월치밀,랍신성능유고.