铸造技术
鑄造技術
주조기술
FOUNDRY TECHNOLOGY
2011年
9期
1230-1233
,共4页
毛双亮%水衡勇%陈闪闪%赵爱民
毛雙亮%水衡勇%陳閃閃%趙愛民
모쌍량%수형용%진섬섬%조애민
高铬铸铁%热处理%硬度%冲击韧度%耐磨性
高鉻鑄鐵%熱處理%硬度%遲擊韌度%耐磨性
고락주철%열처리%경도%충격인도%내마성
研究了Cr26高铬铸铁化学成分的控制范围和热处理工艺对其硬度和冲击性能的影响,分析了该成分高铬铸铁经过不同热处理后的组织.结果表明,采用文中所述生产工艺和1 040℃±10℃×6h特殊淬火液淬火+275℃×6h或440℃×6 h回火的热处理工艺,高铬铸铁硬度达60 HRC以上,冲击韧度达10 J/cm2,其耐磨性是高铬铸铁Cr15的1.32倍,高锰钢ZGMn13的1.95倍.
研究瞭Cr26高鉻鑄鐵化學成分的控製範圍和熱處理工藝對其硬度和遲擊性能的影響,分析瞭該成分高鉻鑄鐵經過不同熱處理後的組織.結果錶明,採用文中所述生產工藝和1 040℃±10℃×6h特殊淬火液淬火+275℃×6h或440℃×6 h迴火的熱處理工藝,高鉻鑄鐵硬度達60 HRC以上,遲擊韌度達10 J/cm2,其耐磨性是高鉻鑄鐵Cr15的1.32倍,高錳鋼ZGMn13的1.95倍.
연구료Cr26고락주철화학성분적공제범위화열처리공예대기경도화충격성능적영향,분석료해성분고락주철경과불동열처리후적조직.결과표명,채용문중소술생산공예화1 040℃±10℃×6h특수쉬화액쉬화+275℃×6h혹440℃×6 h회화적열처리공예,고락주철경도체60 HRC이상,충격인도체10 J/cm2,기내마성시고락주철Cr15적1.32배,고맹강ZGMn13적1.95배.