国外电子测量技术
國外電子測量技術
국외전자측량기술
FOREIGN ELECTRONIC MEASUREMENT TECHNOLOGY
2009年
6期
41-43
,共3页
吴海辉%王芳%刘祖润%王珩琰
吳海輝%王芳%劉祖潤%王珩琰
오해휘%왕방%류조윤%왕형염
PLC%淬火%数字控制
PLC%淬火%數字控製
PLC%쉬화%수자공제
PLC%quenching%digital control
中频发电机励磁PLC系统是为解决目前齿轮埋油淬火机床只能以一种淬火功率为齿面一次淬火,即单齿面一次淬火过程中淬火功率不可调,淬火工艺导致"进齿面处和出齿面处"出现过淬火情况,淬火齿轮不能完全满足工艺要求而研制生产的.可以根据用户输入的位置、功率参数自动计算并输出变化的功率曲线,满足矿用电动轮自卸车内齿环齿面淬火的要求,此种改造思路亦可在其他普通机床数控改造上使用,有良好的推广使用价值.
中頻髮電機勵磁PLC繫統是為解決目前齒輪埋油淬火機床隻能以一種淬火功率為齒麵一次淬火,即單齒麵一次淬火過程中淬火功率不可調,淬火工藝導緻"進齒麵處和齣齒麵處"齣現過淬火情況,淬火齒輪不能完全滿足工藝要求而研製生產的.可以根據用戶輸入的位置、功率參數自動計算併輸齣變化的功率麯線,滿足礦用電動輪自卸車內齒環齒麵淬火的要求,此種改造思路亦可在其他普通機床數控改造上使用,有良好的推廣使用價值.
중빈발전궤려자PLC계통시위해결목전치륜매유쉬화궤상지능이일충쉬화공솔위치면일차쉬화,즉단치면일차쉬화과정중쉬화공솔불가조,쉬화공예도치"진치면처화출치면처"출현과쉬화정황,쉬화치륜불능완전만족공예요구이연제생산적.가이근거용호수입적위치、공솔삼수자동계산병수출변화적공솔곡선,만족광용전동륜자사차내치배치면쉬화적요구,차충개조사로역가재기타보통궤상수공개조상사용,유량호적추엄사용개치.
At present, gear oil quenching machine can only be quenched once with a quenched power tooth flank, that is to say during a single tooth flank quenching, the power of quenching can not be adjusted; quenching process will lead to quench too mach on the into tooth flank and out tooth flank; and quenching gears can not completely meet the technologi-cal requirement. The intermediate frequency generator excite PLC system is developed and produced to solve this prob-lem. This control system bases on users input location, power Parameters automatically calculated and output mutative power curve. It satisfies the requirements of mining dump truck with electric wheel ring gear tooth surface quenching. Such ideas can also be use at other ordinary on the use of CNC transformation, and it has a good promotional value.