CAJ | 학술논문

为研究滑片压缩机卸荷过程的静态特性，建立了流体进入进气口及卸荷阀的流量模型。通过压力一流量特性分析发现，量纲一流量与压力成抛物线关系，并随着压力的增大而减小；通过压力增益特性分析发现，增益曲线的斜率随出口与进口流量系数的比值增大而增大；通过位移一流量特性分析发现，流量随滑柱位移的增大而增大。22kW滑片压缩机的静态特性测试验证了仿真结果。
위연구활편압축궤사하과정적정태특성，건립료류체진입진기구급사하벌적류량모형。통과압력일류량특성분석발현，량강일류량여압력성포물선관계，병수착압력적증대이감소；통과압력증익특성분석발현，증익곡선적사솔수출구여진구류량계수적비치증대이증대；통과위이일류량특성분석발현，류량수활주위이적증대이증대。22kW활편압축궤적정태특성측시험증료방진결과。
In order to study static characteristics during unloading of vane compressors, flow models of fluid entering air intake and fluid entering unloading valve were built. It is found that the relation of dimensionless flow and pressure is parabolic and dimensionless flow decreases with the increasing of pressure by analysis of pressure and flow characteristics. Slope of pressure gain curve increases with ratio of outlet flow coefficient and inlet flow coefficient through research of pressure gain charac- teristics. At last,it is discovered that flow increases with displacement of sliding pole by means of displacement and flow curve. Static characteristics test of 22kW vane compressor verified the above conclusions. The research results provide important theoretical guidance for improvement of response speed and open-closing characteristics of unloading valve.