稀有金属材料与工程
稀有金屬材料與工程
희유금속재료여공정
RARE METAL MATERIALS AND ENGINEERNG
2007年
z3期
451-454
,共4页
电场%TiC-Al2O3-Al复合材料%致密性%燃烧合成
電場%TiC-Al2O3-Al複閤材料%緻密性%燃燒閤成
전장%TiC-Al2O3-Al복합재료%치밀성%연소합성
以3TiO2+3C+(4+x)Al反应体系为对象,利用电场的激活作用和燃烧合成过程中形成的液态Al对合成产物的渗透作用,探讨了在无外加机械压力的条件下直接燃烧合成致密TiC-Al2O3-Al复合材料的可能性.结果表明,外加电场可提高体系的绝热燃烧温度,从而突破该体系只能在x<10 mol下发生燃烧合成反应的热力学限制;而且,随着体系中过余Al量x的增加,合成的TiC和Al2O3晶粒尺寸减小,合成材料的致密性提高.当体系中过余Al量x=14 mol、E=25 V/cm时,直接燃烧合成了致密性达92.5%的TiC-Al2O3-Al复合材料,且该材料具有如下力学性能:硬度HRC=56.5,抗弯强度σf=531 MPa,断裂韧性K1C=10.96MPa·m1/2.
以3TiO2+3C+(4+x)Al反應體繫為對象,利用電場的激活作用和燃燒閤成過程中形成的液態Al對閤成產物的滲透作用,探討瞭在無外加機械壓力的條件下直接燃燒閤成緻密TiC-Al2O3-Al複閤材料的可能性.結果錶明,外加電場可提高體繫的絕熱燃燒溫度,從而突破該體繫隻能在x<10 mol下髮生燃燒閤成反應的熱力學限製;而且,隨著體繫中過餘Al量x的增加,閤成的TiC和Al2O3晶粒呎吋減小,閤成材料的緻密性提高.噹體繫中過餘Al量x=14 mol、E=25 V/cm時,直接燃燒閤成瞭緻密性達92.5%的TiC-Al2O3-Al複閤材料,且該材料具有如下力學性能:硬度HRC=56.5,抗彎彊度σf=531 MPa,斷裂韌性K1C=10.96MPa·m1/2.
이3TiO2+3C+(4+x)Al반응체계위대상,이용전장적격활작용화연소합성과정중형성적액태Al대합성산물적삼투작용,탐토료재무외가궤계압력적조건하직접연소합성치밀TiC-Al2O3-Al복합재료적가능성.결과표명,외가전장가제고체계적절열연소온도,종이돌파해체계지능재x<10 mol하발생연소합성반응적열역학한제;이차,수착체계중과여Al량x적증가,합성적TiC화Al2O3정립척촌감소,합성재료적치밀성제고.당체계중과여Al량x=14 mol、E=25 V/cm시,직접연소합성료치밀성체92.5%적TiC-Al2O3-Al복합재료,차해재료구유여하역학성능:경도HRC=56.5,항만강도σf=531 MPa,단렬인성K1C=10.96MPa·m1/2.