炼钢
煉鋼
련강
STEELMAKING
2007年
3期
27-31
,共5页
连铸板坯%纵裂纹%浸入式水口%保护渣
連鑄闆坯%縱裂紋%浸入式水口%保護渣
련주판배%종렬문%침입식수구%보호사
通过对济钢第三炼钢厂连铸工艺环节的分析,认为引起板坯纵裂纹的主要原因是钢水成分和质量、浸入式水口的尺寸及浸入深度、结晶器冷却强度、保护渣性能及其吸收夹杂物后成分和性能变化等.通过采取措施使板坯的表面纵裂纹得到有效的控制,纵裂纹发生率由1.86%控制到0.65%左右.
通過對濟鋼第三煉鋼廠連鑄工藝環節的分析,認為引起闆坯縱裂紋的主要原因是鋼水成分和質量、浸入式水口的呎吋及浸入深度、結晶器冷卻彊度、保護渣性能及其吸收夾雜物後成分和性能變化等.通過採取措施使闆坯的錶麵縱裂紋得到有效的控製,縱裂紋髮生率由1.86%控製到0.65%左右.
통과대제강제삼련강엄련주공예배절적분석,인위인기판배종렬문적주요원인시강수성분화질량、침입식수구적척촌급침입심도、결정기냉각강도、보호사성능급기흡수협잡물후성분화성능변화등.통과채취조시사판배적표면종렬문득도유효적공제,종렬문발생솔유1.86%공제도0.65%좌우.