钢铁
鋼鐵
강철
IRON & STEEL
2006年
11期
29-31
,共3页
张莉%徐宏%崔建军%廖礼宝%卢静
張莉%徐宏%崔建軍%廖禮寶%盧靜
장리%서굉%최건군%료례보%로정
钢包%烘烤%温度场
鋼包%烘烤%溫度場
강포%홍고%온도장
针对新型300 t钢包,采用现场测试和三维有限元数值模拟对烘烤阶段包壳表面的温度场进行了研究,有限元计算结果与现场测试数据吻合较好,所采用数值模型可靠准确地反映了实际情况.现场测试结果表明,钢包在烘烤阶段,包口处的包壳表面温度最高,其余部位温度相差不大.钢包烘烤10 h后投入运行,包壳表面的温度持续上升,仍处于蓄热状态.通过数值模拟得到新型钢包要经过30 h的烘烤才能达到稳态,烘包过程进行15 h后,包壳表面温升速率降低到小于5 ℃/h.
針對新型300 t鋼包,採用現場測試和三維有限元數值模擬對烘烤階段包殼錶麵的溫度場進行瞭研究,有限元計算結果與現場測試數據吻閤較好,所採用數值模型可靠準確地反映瞭實際情況.現場測試結果錶明,鋼包在烘烤階段,包口處的包殼錶麵溫度最高,其餘部位溫度相差不大.鋼包烘烤10 h後投入運行,包殼錶麵的溫度持續上升,仍處于蓄熱狀態.通過數值模擬得到新型鋼包要經過30 h的烘烤纔能達到穩態,烘包過程進行15 h後,包殼錶麵溫升速率降低到小于5 ℃/h.
침대신형300 t강포,채용현장측시화삼유유한원수치모의대홍고계단포각표면적온도장진행료연구,유한원계산결과여현장측시수거문합교호,소채용수치모형가고준학지반영료실제정황.현장측시결과표명,강포재홍고계단,포구처적포각표면온도최고,기여부위온도상차불대.강포홍고10 h후투입운행,포각표면적온도지속상승,잉처우축열상태.통과수치모의득도신형강포요경과30 h적홍고재능체도은태,홍포과정진행15 h후,포각표면온승속솔강저도소우5 ℃/h.