CAJ | 학술논문

利用PC机驱动步进电机和钻床改装的攻丝机械构成的步进式振动攻丝系统，根据系统情况确定工艺参数的实验范围.利用扭矩传感器测定攻丝扭矩.最后对所采集的扭矩数据进行分析，描绘工艺参数与攻丝扭矩关系图形，并在现有实验条件下得出工艺参数与振动攻丝扭矩关系的初步结论.对分析工艺参数与振动攻丝效果和工艺参数与材料之间的关系具有一定的理论及实际意义.
이용PC궤구동보진전궤화찬상개장적공사궤계구성적보진식진동공사계통，근거계통정황학정공예삼수적실험범위.이용뉴구전감기측정공사뉴구.최후대소채집적뉴구수거진행분석，묘회공예삼수여공사뉴구관계도형，병재현유실험조건하득출공예삼수여진동공사뉴구관계적초보결론.대분석공예삼수여진동공사효과화공예삼수여재료지간적관계구유일정적이론급실제의의.
The stepping vibration tapping system is made of a stepping driver and a tapping machine refitted from drill press controlled by PC. According to the system conditions,the range of vibration tapping parameters is determined. Torque data are measured by the torque sensor.Finally,the graph between vibration tapping parameters and tapping torque is draughted by studying the collecting data.A preliminary conclusion of tapping parameters and tapping effect is drawn under the experimental conditions in existence.This article is of some academic and practical significance for analyzing the relationship between technical parameters and effect of vibration tapping,and that between technical parameters and materials.