焊接学报
銲接學報
한접학보
TRANSACTIONS OF THE CHINA WELDING INSTITUTION
2007年
5期
17-20
,共4页
余淑荣%熊进辉%樊丁%陈剑虹
餘淑榮%熊進輝%樊丁%陳劍虹
여숙영%웅진휘%번정%진검홍
铝合金%激光拼焊%异厚度%温度场%数值模拟
鋁閤金%激光拼銲%異厚度%溫度場%數值模擬
려합금%격광병한%이후도%온도장%수치모의
利用ANSYS软件对异厚度铝合金激光拼焊的温度场进行三维瞬态有限元分析.为了提高计算精度和效率,采用过渡网格划分形式划分网格以保证焊缝处网格足够细小.选取高斯函数分布的热源模型,利用ANSYS软件的APDL语言编写程序实现移动热源的加载.在模拟中既考虑一般激光焊接中材料热物理性能参数的温度相关性、熔化潜热、边界条件、等离子体、熔池对流、保护气体等对温度场的影响,又考虑异厚度铝合金激光拼焊的特性.利用高温热电偶检测异厚度铝合金激光拼焊过程中的温度场,将模拟值与实测值进行对比分析,结果表明,模拟值与实测值吻合良好.
利用ANSYS軟件對異厚度鋁閤金激光拼銲的溫度場進行三維瞬態有限元分析.為瞭提高計算精度和效率,採用過渡網格劃分形式劃分網格以保證銲縫處網格足夠細小.選取高斯函數分佈的熱源模型,利用ANSYS軟件的APDL語言編寫程序實現移動熱源的加載.在模擬中既攷慮一般激光銲接中材料熱物理性能參數的溫度相關性、鎔化潛熱、邊界條件、等離子體、鎔池對流、保護氣體等對溫度場的影響,又攷慮異厚度鋁閤金激光拼銲的特性.利用高溫熱電偶檢測異厚度鋁閤金激光拼銲過程中的溫度場,將模擬值與實測值進行對比分析,結果錶明,模擬值與實測值吻閤良好.
이용ANSYS연건대이후도려합금격광병한적온도장진행삼유순태유한원분석.위료제고계산정도화효솔,채용과도망격화분형식화분망격이보증한봉처망격족구세소.선취고사함수분포적열원모형,이용ANSYS연건적APDL어언편사정서실현이동열원적가재.재모의중기고필일반격광한접중재료열물이성능삼수적온도상관성、용화잠열、변계조건、등리자체、용지대류、보호기체등대온도장적영향,우고필이후도려합금격광병한적특성.이용고온열전우검측이후도려합금격광병한과정중적온도장,장모의치여실측치진행대비분석,결과표명,모의치여실측치문합량호.