中国有色金属学会会刊(英文版)
中國有色金屬學會會刊(英文版)
중국유색금속학회회간(영문판)
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
2003年
3期
632-635
,共4页
张先宏%阮雪榆%K.Osakada
張先宏%阮雪榆%K.Osakada
장선굉%원설유%K.Osakada
magnesium alloy%flow stress%warm forging%work softening%dynamic recrystallization
To understand the forming behaviour of magnesium alloys, the upsetting test of Mg alloys at evaluated temperature was conducted. It is found that Mg alloys are brittle at temperatures below 200 ℃. When temperature is higher than 400 ℃, Mg alloy is not suitable for forging because of heavy oxidation. Mg alloy shows an excellent workability at temperatures from 250 to 400 ℃. Because in warm forging the flow stress decreases with increasing strain, which is so-called work softening, no appropriate material formulation is available for Mg alloys. For the evaluation of flow stress of Mg alloys in warm forging processes, a formula is derived by analyzing the stress data measured at various temperatures in upsetting test. It is demonstrated that the formula fits the flow stress obtained from experiment.